Optimisation of the composing part of hand brake mechanism

• Autorzy: Ekinovic S. , Saric E.
• Języki publikacji: EN

Abstrakty

EN

Purpose: The purpose of work is to show an example of 3D modeling and optimization combined with the design and production of prototype and experimental testing of a very important composing part of the mechanism for compensating the aeration in automobile hand brake. The basic notions about purpose, function, buyer's demands, specifics of the hand brake assemble construction are given. The proposal of concept for the development of the assembly, conceived by the buyer, is given as well. Design/methodology/approach: Very important task of the mechanism for compensating the aeration in automobile hand brake is to assure its function safety and a permanent grip angle of the hand brake. A new construction is made, which will satisfy the above mentioned demands, then the 3D technique is used to choose an optimal model, and, based on it, prototypes were produced and experimentally tested in real conditions. Findings: A new design of the elements of hand brake is developed. Research limitations/implications: The proposed methodology is repeatable for other similar mechanisms. Practical implications: Based on the research, new design of the mechanism of automobile hand brake is developed, by which the advancement of final product is enabled. Originality/value: : The demands of construction and mechanism functional safety are entirely satisfied.

Słowa kluczowe

EN

numerical techniques; 3D modelling; prototype testing

PL

techniki numeryczne; modelowanie 3D; testowanie za pomocą prototypu

• Wydawca: International OCSCO World Press
• Czasopismo: Journal of Achievements in Materials and Manufacturing Engineering
• Rocznik: 2007
• Tom: Vol. 24, nr 1
• Strony: 208--211
• Opis fizyczny: Bibliogr. 17 poz., fot., tab.

Twórcy

autor

Ekinovic S.

autor

Saric E.

• Faculty of Mechanical Engineering, University of Zenica, Fakultetska 1, 72000 Zenica, Bosnia & Herzegovina,

Bibliografia

• [1] S. Jack Hu, C. Jaime, Modeling and control of compliant assembly system, Annals of the CIRP 55/1 (2006) 19-22.
• [2] F. Kimura, N. Yamane, Haptic environment for designing human interface of virtual mechanical products, Annals of the CIRP 55/1 (2006) 127-130.
• [3] A. Ballu, H. Falgarone, N. Chevassus, L. Mathiu, A new design method based on functions and tolerance specifications for product modeling, Annals of the CIRP 55/1 (2006) 139-142.
• [4] S. Tickhiewitch, M. Shpitalni, F.L. Krause, Virtual research-lab.: A new way to do research, Annals of the CIRP 55/2 (2006) 769-792.
• [5] I. Pahole, S. Bonifarti, M. Ficko, B. Vaupotic, S. Kovacic, J. Balic, Bending of sheet metal of complicated shapes (for 90° angle and more) in combined tools, Journal of Achievements in Materials and Manufacturing Engineering 16 (2006) 88-93.
• [6] S. Ekinovic, E. Saric, Optimization of hand brake mechanism elements, Research project (2006), (in Bosnian).
• [7] B. Mursec, M. Janzekovic, F. Cus, U Zuperl: Comparison of rolls after sowing of budewheat, Journal of Achievements in Materials and Manufacturing Engineering 17 (2006) 269-272.
• [8] H. Gharib, A.S. Wifi, M. Younan, A. Nassef: An analytical incremental model for analysis of the cup drawing, Journal of Achievements in Materials and Manufacturing Engineering 17 (2006) 245-248.
• [9] V. Briabant, C. Fluery, Shape optimal design using B-splines, Computer Method Applications in Mechanical Engineering 44 (1984) 247-267.
• [10] K.M. Chang, K.K. Choi, A geometry based parameterization method for shape design of elastic solids, Methods of Structures and Machines 20 (1992) 215-252.
• [11] G.N. Vanderplats, Numerical Optimization Techniques for Engineering Design, Mcgraw Hill Series in Mechanical Engineering, Blacklick, 1984.
• [12] M.E. Botkin, Shape design modeling using fully automatic three-dimensional mesh generation, Finite Elements in Analysis and Design 10 (1991) 165-181.
• [13] A. Muminovic, Geometric modeling and engineering analysis, Proceedings of the 10th International Research/Expert Conference on Trends in the Development of Machinery and Associated Technology TMT'2006, Barcelona-Lloret de Mar, 2006, 745-748.
• [14] F.M.L. Amirouche, Higher-Principles of Computer-aided Design and Manufacturing, Second Edition, Prentice Hall, Upper Saddle River, New Jersey, 2004.
• [15] J.E. Shigley, C.R.Mischke, R.G. Budunas, Mechanical Engineering Design, 7th Edition, McGraw-Hill, New York, 2003.
• [16] R. Limpert, Brake Design and Safety, 2nd Edition, Society of Automotive Engineers, 1999.
• [17] C. Cerbu, I. Curtu, Research concerning structural optimization of the rear plate of a motorboat hull made of composite materials, Proceedings of the 10th International Research/Expert Conference on Trends in the Development of Machinery and Associated Technology, TMT'2006, Barcelona-Lloret de Mar, 2006, 749-752.