The visualisation of manufacturing process of pipes welding

• Autorzy: Topolska S. , Szewieczek D.
• Konferencja: 12th International Scientific Conference CAM3S'2006, 27-30th November 2006, Gliwice-Zakopane
• Języki publikacji: EN

Abstrakty

EN

Purpose: The aim of this paper is to show the concept of application the visualization technique for educational aims. This approach allows enriching a didactic process. Also this technique could help in solving problems consider with analyzing the manufacturing processes. Design/methodology/approach: The presented work bases on the application of computer visualization techniques for elaboration the presentation of chosen manufacturing processes. The computer visualization has been based on films captured in the manufacturing plant. Findings: The main result of this work is the proposal of the methodology of preparing visualization approach. It has been propose some remarks relating to this methodology. Research limitations/implications: The presented elaboration bases on one chosen manufacturing process. As an exemplar it was chosen the process of pressure welding of pipes with currents of high frequency. So the presented process links two main manufacturing processes: The welding technology and the plastic forming. Practical implications: The implication of the work could be found in two remarks. Firstly it is important to introduce to the industry practice the visualization approach as more didactic and which allows omitting some faults generated in a conventional approaches. Secondly this approach could enrich the scope of approaches offered by educational platforms in e-learning systems. Originalityvalue: The value of this work is its subject. In this work a new educational approach is presented. Secondly, in this work it is presented the analysis of preparing the visualization of a manufacture process. Also some solutions in this area are included.

Słowa kluczowe

EN

computer aided teaching; e-learning

PL

komputerowe wspomaganie nauczania; e-learning

• Wydawca: International OCSCO World Press
• Czasopismo: Journal of Achievements in Materials and Manufacturing Engineering
• Rocznik: 2007
• Tom: Vol. 20, nr 1-2
• Strony: 575--578
• Opis fizyczny: Bibliogr. 15 poz., rys.

Twórcy

autor

Topolska S.

autor

Szewieczek D.

• Department of Constructional and Special Materials Engineering, Institute of Engineering Materials and Biomaterials, Silesian University of Technology, ul. Konarskiego 18 a, 44-100 Gliwice, Poland,

Bibliografia

• [1] J. Świder, R. Zdanowicz, G. Kost, Production Systems Investigation Using Complex Model Systems (in Polish), Proceeding of M3E 2005, 631-638.
• [2] S. Topolska, Process of Vacuum Metallization – A Simulation in the Taylor Program, Proceedings of CAM3S 2005, 63-68.
• [3] T. Karpiński, Production Engineering (in Polish), WNT, Warszawa 2004.
• [4] M. Blicharski Material Engineering. Steel (in Polish), WNT, Warszawa 2004.
• [5] A. Klimpel, Metals welding, pressure welding and cutting, WNT, Warszawa 1999.
• [6] R. Hoobasar, Pipe Welding Procedures, Industrial Press, New York 2002.
• [7] J. Lippold, D. Kotecki Welding Metallurgy and Weldability of Stainless Steel, Wiley-Interscience, New York 2005.
• [8] K. Abou El Hossein, Z. Yahya, High Speed End Milling of AISI 304 Stainless Steel Using New Geometrically Developed Carbide Inserts, Proceedings of AMME 2005, 1-8.
• [9] S. Topolska, Characteristic Defects of Metallic Coatings Obtained in the Metallization Process, Proceedings of AMME 2005, 675-680.
• [10] S. Fok, B. Mitchell, J. Smart, Testing to Distinguish Between Failure Laws for Ceramics, Proceedings of AMME 2000, 187-190.
• [11] E. Kindlarski, Products Quality (in Polish), Scientific Publisher PWN, Warszawa 1988.
• [12] J. Oakland, Total Quality Management, Oxford Press, Oxford (1994).
• [13] A. Gwiazda, Quality Tools in a Process of Technical Project Management, Journal of Achievements in Materials and Manufacturing Engineering (2006) Vol. 18, Issue 1-2, 439 - 442.
• [14] S. Rusz, The Influence of Technological Parameters on the Rotary Pressing Process, Proceedings of AMME 2000, 475-478.
• [15] S. Topolska, Analysis of the Technological Process of Rings of Train Wheels, Journal of Achievements in Materials and Manufacturing Engineering (2006) Vol. 17, Issue 1-2, 405-408.