Identyfikatory
Warianty tytułu
Konferencja
12th International Scientific Conference CAM3S'2006, 27-30th November 2006, Gliwice-Zakopane
Języki publikacji
Abstrakty
Purpose: Technical-economic aspects of the introduction of integrated technological lines for the production of metallurgical products are presented in the work. They have a special importance for microalloyed steels used in different branches of the industry. Design/methodology/approach: The analysis was carried out on a basis of requirements concerning hot-working of microalloyed steels with high mechanical properties produced by the use of the controlled rolling and thermo-mechanical processing. Findings: A modification of some well-known integrated lines consisting in the introduction of the cooling machine between roughing and finishing trains, instead of reheating machine gives a possibility to realize a controlled rolling. Moreover, using retention shields makes possible to manufacture the products by the thermo-mechanical processing. Research limitations/implications: There is a necessity to adjust technological parameters to precise controlling a course of material processes. Practical implications: Development of demands concerning integrated lines enabling to realize the controlled rolling and thermo-mechanical processing. Originality/value: Manufacturing mass-scale products from microalloyed steels in integrated energy-saving lines.
Słowa kluczowe
Wydawca
Rocznik
Tom
Strony
399--402
Opis fizyczny
Bibliogr. 23 poz., rys., tab.
Twórcy
autor
- Division of Constructional and Special Materials Engineering, Institute of Engineering Materials and Biomaterials, Silesian Univeristy of Technology, ul. Konarskiego 18 a, 44-100 Gliwice, Poland, jan.adamczyk@polsl.pl
Bibliografia
- [1] SMS News Letter 3 (1996) No 2; 5 (1998) No 1, www.KruppThyssenStahl; www.polsl.katowice.pl.
- [2] S. Turczyn, A. Nowakowski, Metallurgist-Metallurgical News 66 (1998) 86 (in Polish).
- [3] J.Adamczyk, Massive steel products manufactured in integrated processes, Proceedings of the 3rd Scientific Conference on Materials, Mechanical and Manufacturing Engineering, Gliwice - Wisła, 2005, 267.
- [4] R.A. Joyce, J.C. Mayberrky, Iron and Steel Engineer. 9, 1999, Ch-119.
- [5] W. Warnecke, R. Bode et al., Thyssen Tech. Berichte 23, 1 (1991)75.
- [6] A.R. Marder, Progress in Materials Sci., 45 (2000) 191.
- [7] J.Adamczyk, A. Grajcar, Structure and mechanical properties of DP-type and TRIP-type sheets obtained after the thermomechanical processing, Journal of Materials Processing Technology, 162-163 (2005) 267.
- [8] J. Adamczyk, Development of the microalloyed constructional steels, Journal of Achievements in materials and Manufacturing Engineering, 14 (2006) 9.
- [9] J. Adamczyk, M. Opiela, Anisotropy of plastic properties of the toughening steel plates rolled using the thermo-mechanical method, 13th Inter. Scie. Conf. on Achievements in Mechanical and Materials Engineering, Gliwice-Wisła, 2005, 13.
- [10] J.Adamczyk, E. Kalinowska-Ozgowicz, R. Wusatowski, Interaction of carbonitrides V(C, N) undissolved in austenite on the structure and mechanical properties of microalloyed V-N steels, Journal of Materials Processing Technology, 53 (1995) 23.
- [11] J. Adamczyk, M. Opiela, Engineering of some metallurgical products of microalloyed structural steels, Proceedings of the 3rd Scientific Conference on Materials, Mechanical and Manufacturing Engineering, Gliwice – Wisła, 2005, 9.
- [12] K. Hulka, Microalloyed Constructional and Engineering Steel, Niobium Product Company GmbH, 1990.
- [13] M. Korchynsky, Microalloyed Steels, Proc. Conf. Microalloyed'75, Union Carbide Corp., New York, 1975.
- [14] A.J. De Ardo, G.A. Ratz, J.P. Wray, Proc. Conf. Thermomechanical Processing of Microalloying Austenite, Met. Soc. AIME, Warrendale PA, 1982.
- [15] Proc. Conf. HSLA Steels-Technology and Applications, ASM, Metals Park, Ohio, 1984.
- [16] K.A.Taylor, S.W.Thompson, F.B. Fletcher, Physical Metallurgy of Direct Quenched Steels, Proc. Symp. TSM and ASM, Chicago, Illinois, 1992.
- [17] M. Korchynsky, Microalloyed Steels, Proc Int. Conf. Microalloying'95, Iron and Steel Soc., Pittsburg, PA, 1995.
- [18] T. Gladman, The Physical Metallurgy of Microalloyed Steels, The University Press, Cambridge, 1997.
- [19] J.Adamczyk, Engineering of Steel Products, The Silesian University of Technology Publishers, Gliwice, 2000 (in Polish).
- [20] J. Adamczyk, Engineering of Metallic Materials. The Silesian University of Technology Publishers, Gliwice. 2005 (in Polish).
- [21] M. Cygler et al., Technical Report CC and Rolling, SMS, 1993.
- [22] P. Nilles, Metallurgical Plant and Technology Int., 3 (1994) 46.
- [23] J. Adamczyk, M. Opiela, Influence of the thermo-mechanical treatment parameters on the inhomogeneity of the austenite structure and mechanical properties of the Cr-Mo steel with Nb, Ti and В microaddition, Journal of Materials Processing Technology 157-158 (2004) 456.
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-article-BOS5-0018-0089