Tribological properties of tissue in biobearings and bioreactors as the histotribological parameters.

• Autorzy: Wierzcholski K. , Ghaemi M.H.

Warianty tytułu

PL

Tribologiczne własności tkanek w biołożyskach i bioreaktorach jako parametry histotribologii.

• Języki publikacji: EN

Abstrakty

EN

This paper presents the main ideas behind a Transfer of Knowledge (ToK) project funded by European Commission, called "BioBearing". BioBearing is designed to be run for the period of 2005-2008. The main field of research is tribology of tissue. Tissue is considered as a histotribological element. Particularly, lubrication of human joints by non-Newtonian synovial fluids in unsteady state condition is considered. In this relation, stochastic behavior of cartilage deformation in human joints is described. Additionally, the cultivation process of cartilage tissues of human joints in bioreactors and possibility of shear force and shear rate control during this process will be investigated.

PL

Autorzy przedstawiają zarys głównych celów badawczych podjętych w unijnym projekcie badawczym zatwierdzonym przez komisję Europejską do realizacji w latach 2005-2008. Koordynatorem projektu jest K. Wierzcholski, autor niniejszego artykułu. Badania teoretyczne, numeryczne i eksperymentalne dotyczyć będą problemów tribologii tkanek jako elementów histotribologii a w szczególności smarowania stawów nienewtonowskimi cieczami synowialnymi w warunkach nieustalonych z uwzględnieniem deformacji chrząstki stawowej w opisie stochastycznym. Ponadto rozpatrywany będzie problem hodowli chrząstki stawowej w bioreaktorze z uwzględnieniem możliwości sterowania siłami tarcia.

Słowa kluczowe

EN

BioBearing project; histotribology; bioreactor; biotribology; synovial fluid; human joints cartilage; ToK project

PL

projekt BioBearing; histotribologia; bioreaktory; biotribologia; ciecz synowialna; chrząstka stawowa; projekt europejski

• Wydawca: Komitet Budowy Maszyn PAN
• Czasopismo: Zagadnienia Eksploatacji Maszyn
• Rocznik: 2005
• Tom: Vol. 40, nr 3
• Strony: 17--30
• Opis fizyczny: Bibliogr. 18 poz.

Twórcy

autor

Wierzcholski K.

• Gdansk University of Technology, Faculty of Ocean Engineering and Ship Technology, Narutowicza 11/12, 80-952 Gdansk

autor

Ghaemi M.H.

• Gdansk University of Technology, Faculty of Ocean Engineering and Ship Technology, Narutowicza 11/12, 80-952 Gdansk

Bibliografia

• [1] Bastin G. and Dochain D.: On-line Estimation and Adaptive Control of Bioreactors, Elsevier, pp. 375. 1990.
• [2] Buckwalter J.A., James Martin: Degenerative Joint Diseases, Clinical Symposia, CIBA,Vol.47, Mumber 2,1995, pp. 3-15.
• [3] Burais N, Baraton P., Gaspard J.Y.: Numerical modelisation of induce currents in human body by electromagnetic apparatus in medium frequency range CEM, 98, 8-11 June 1998, Brest, France.
• [4] Chun-Yuh Huang, Soltz Michael A., Kopacz Monika, Mow Van C., Ateshian Gerard A.: Experimental Verification of the Roles of Intrinsic Matrix Viscoelasticity and Tension-Compression Nonlinearity in the Biphasic Response of Cartilage, Trans.of ASME Vol. 125, February 2003, p. 84.
• [5] Fyhrie D.P., Barone J.R.: Polymer Dynamics as a Mechanistic Model for the Flow-Independent Viscoelasticity of Cartilage, Trans, of the ASME Vol. 125, October 2003, pp. 578-584.
• [6] Frangu, L., Caraman, S., Ceanga E: Model Based Predictive Control using Neural Network for Bioreactor Process Control, Control Engineering and Applied Informatics, SRAIT, Bucharest, 3, No. 1/2001, pp. 29-38.
• [7] Giselbrecht S., Giezelt T., Gottwald E., Guber A.E., Trautmann C., Truckenmiiller R., Weibezahn K.F.: Microthermoforming as a novel technique for manufacturing scaffolds in tissue engineering CellChipdsJEE Proc.-Nanobiotechnology,Vol. 151, No. 4, August 2004.
• [8] Garcia J.J., Altiero N.J., Haut R.C.: Estimation of in Situ Elastic Properties of Biophasic Cartilage Based on a Transversely Isotropic Hypo-Elastic Model, Journal of Biomechanical Engineering, vol. 122, February 2000, pp. 1-8.
• [9] Garcia C.E., Morari M.: Internal Model Control. A Unifying Review and Some New Results, Ind. Engng. Chem. Process Des. Dev. 25, 1982, 403^111.
• [10] Korbicz J., Obuchowicz A., Uciński D.: Artificial Neural Network, Principles and Applications (in Polish), Warszawa, Publisher: AOW PLJ, Warszawa 1994.
• [11] Suciu A.N., Iwatsubo T., Matsuda M.: Theoretical Investigation of an Artificial Joint With Micro-Pocket-Covered Component and Biphasic Cartilage on the Opposite Articulating Surface, Journal of Biomechanical Engineering, August 2003, Vol 1 25, pp. 425-433.
• [12] Maurel W., Wu,Y., Thalmann D.: Biomechanical Modells for Soft Tissue Simulation, Springer Verlag Berlin/Heidelberg 1998.
• [13] Raimondi M.T., Boschetti F., Falcone L., Fiore G.B., Remuzzi A., Marinonni E., Marazzi M., Pietrabissa R.: Mechanobiology of engineered cartilage cultured under a quantified fluid-dynamic environment. Biomechanics and Modeling in Mechanobiology, 2002, 1, 69
• [14] Trzeciak T., Kruczyński J., Lubiatowski P., Piontek T., Jaroszewski J.: The reconstruction of defects in articular cartilage using analogous chondrocytes.Ortopedia Traumatologia Rehabilitacja, Vol. 3, Nr 2, 2001, 200-204.
• [15 ] Wierzcholski Krzysztof: Theory of viscoelastic lubrication of hip joint in stochastic description for periodic motion. Tribologia, 2004, 4(196), pp. 327-338.
• [16] Winslow W.M.: Induced Vibration of Suspensions. Journal of Applied Physics, XII, 1949, vol. 20, nrl2,pp. 1137-1140.
• [17] Woo S-Y, Johnson G.A., Smith B.A.: Mathematical Modeling of Ligaments and Tendons .Journal Biomechanical Engineering 115, 468—473, 1993.
• [18] Xiao H., Bruhns O.T., Meyers A.: Hypo-elasticity model based upon the logarithmic stress rate, J. Elast., 47, 1997, pp. 51-68.