Powiadomienia systemowe
- Sesja wygasła!
- Sesja wygasła!
Tytuł artykułu
Autorzy
Identyfikatory
Warianty tytułu
Modyfikacja mikrostruktury stopu tytanu Ti-6Al-4V w wyniku laserowego nawęglania.
Konferencja
XVIth Physical Metallurgy and Materials Science Conference on Advanced Materials and Technologies AMT'2001, Gdańsk-Jurata, 16-20 September 2001
Języki publikacji
Abstrakty
Przeprowadzono laserowe przetopienie powierzchni stopu tytanu Ti-6Al-4V przy użyciu lasera impulsowego. Stosowano próbki z pokryciem grafitowym oraz bez pokrycia. Obserwowano zmiany mikrostruktury stopu w warstwie przetopienia i strefie wpływu ciepła. Stwierdzono wzrost mikrotwardości (do około 6 GPa) modyfikowanych laserowo warstw wierzchnich.
The laser surface remelting of Ti-6Al-4V titanium alloy without coat was carried out in order to determinate its microstructure. Laser alloying was performed on samples, coated by graphite powders in order to form titanium carbides as a consequence of laser pulsed irradiation. Alloyed layers containing TiC phase in ductile martensitic matrix exhibit high microhardness (about 6 GPa), excellent bonding with the substrate and are free of cracks.
Wydawca
Czasopismo
Rocznik
Tom
Strony
819--822
Opis fizyczny
Bibliogr. 12 poz., rys.
Twórcy
autor
- Department of Materials Science, Rzeszów University of Technology, Poland
autor
- Department of Materials Science, Rzeszów University of Technology, Poland
autor
- State University „Lvivska Politechnika” Lviv, Ukraine
autor
- Department of Materials Science, Rzeszów University of Technology, Poland
- Rzeszów University of Technology, Department of Materials Science, Poland
Bibliografia
- [1] Burakowski T., Wierzchoń T.: Inżynieria powierzchni metali. WNT, Warszawa, 1995.
- [2] Ignatiev M., Kovalev E., Melekhin I., Smurov Yu., Sturlese S.: Investigation of the hardening of a titanium alloy by laser nitriding. Wear 166 (1993) 233-236.
- [3] Ettagi S., Hays V., Hantzpergue J., Saindrenan G., Remy J.C.: Mechanical, structural and tribological properties of titanium nitrided by a pulsed laser. Surface and Coatings Technology. 100 (1998) 428-432.
- [4] Kloosterman A.B., De Hosson J.Th.M.: Microstructural characterization of laser nitrided titanium. Scripta Metallurgica et Materialia 33 (1995) 567-573
- [5] Jiang P., He X.L., Li X.X., Zu L.G., Wang H.M.: Wear resistance of a laser surface alloyed Ti-6AI-4V alloy. Surface and Coatings Technology. 130 (2000) 24-28.
- [6] Mridha S., Baker T.N.: Characteristic features of laser nitrided surfaces of two titanium alloys. Materials Science and Engineering A142 (1991) 115-124
- [7] Mridha S., Baker T.N.: Surface cracking in laser-nitrided titanium of commercial purity and possible ways of reducing these defects. Processing of Advanced Materials 4 (1994) 85-94.
- [8] Ивасишин О.М., Марковский П.Е., Марковский Е.А.: Влияние лазерного легирования углеродом на износостойкость титановых сплавов. Трение и износ 11 (1990) 717-721.
- [9] Courant B., Hantzpergue J.J., Benayoun S.: Surface treatment of titanium laser irradiation to improve resistance to dry-sliding friction. Wear 236 (1999) 39-46
- [10] Плешаков Е., Сенявський Я., Фiлiп р., МиниК С.: Поверхневе лазерне гартування й навуглецювання титанового сплаву B22. Вісник ДУ „Львівська політехніка” 412 (2000)125-130.
- [11] Fouilland-Paille L., Ettagi S., Benayoum S, Hantzpergue J.J.: Structural and mechanical characterization of Ti/TiC cermet coatings synthesized by laser melting, Surface and Coatings Technology 88 (1996) 204-211.
- [12] Углов А.А., Смуров И.Ю., Гуськов А.Г. Тагиров К.И.: Нестационарный термокапиллярный массоперенос при лазерном легировании металлов. Инженерно-физический журнал 56 (1989) 799-805.
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-article-BOS5-0003-0040