Effect of cooling rate on the solidification behavior of MC MgAl6Zn1 alloy

• Autorzy: Dobrzański L. A. , Król M. , Tański T. , Maniara R.
• Języki publikacji: EN

Abstrakty

EN

In this work effect of cooling rate on thermal characteristic results of MC MgAl6Zn1 cast alloy have been described. The solidification process was studied using the cooling curve and crystallization curve at solidification rate ranging from 0.6 degree C/s up to 2.4 degree C/s. It was determined that the higher solidification rate decreases the solidus temperature. In addition, it was observed that the beginning of nucleation of alpha(Mg)-betha(Mg-Mg17Al12) eutectic temperature constituent increases when the solidification rate increases.

Słowa kluczowe

EN

manufacturing; processing; casting; MC MgAl16Zn1; thermal analysis; UMSA

PL

wytwarzanie; przetwarzanie; odlewanie; MC MgAl6Zn1; analiza termiczna; UMSA

• Wydawca: Komitet Nauki o Materiałach PAN
• Czasopismo: Archives of Materials Science
• Rocznik: 2008
• Tom: Vol. 29, nr 3
• Strony: 110--117
• Opis fizyczny: Bibliogr. 14 poz., rys., tabl.

Twórcy

autor

Dobrzański L. A.

autor

Król M.

autor

Tański T.

autor

Maniara R.

• Division of Materials Processing Technology, Management and Computer Techniques in Materials Science, Institute of Engineering Materials and Biomaterials, Silesian University of Technology, ul. Konarskiego 18a, 44-100 Gliwice, Poland,

Bibliografia

• [1] L. Cizek, M. Greger, L. Pawlica, L.A. Dobrzński, T. Tański, Study of selected properties of magnesium alloy AZ91 after heat treatment and forming, Journal of Materials Processing Technology 157-158 (2004) 466-471.
• [2] ASM Specialty Handbook- Magnesium and Magnesium Alloys, Ed. M.M. Avedesian, and H. Baker, ASM International, USA, 1999, 3-84.
• [3] K.U. Kainer, Magnesium – alloys and technologies, Wiley-VCH Verlag GmbH & Co. KG aA, Weinheim, 2003.
• [4] W. Kasprzak, J.H. Sokolowski, W. Sahoo, L.A. Dobrzański, Thermal and structural characteristics of the AZ50 magnesium alloy, Journal of Achievements in Materials and Manufacturing Engineering 29/2 (2008) 179-182.
• [5] http://www.magnesium.com
• [6] L. Backuerud, G. Chai, J. Tamminen, Solidification characteristics of aluminum alloys, Vol. 2: Foundry Alloys, AFS Skanaluminium, Stockholm, 1990.
• [7] L. Backuerud, G. Chai, Solidification characteristics of aluminum alloys, Vol. 3: Foundry Alloys, AFS Skanaluminium, Stockholm, 1990.
• [8] D. Emadi, L.V. Whiting, S. Nafisi, R. Ghomashchi, Applications of thermal analysis in quality control of solidification processes, Journal of Thermal Analysis and Calorimetry 81 (2005) 235-242.
• [9] L.A. Dobrzański, W. Kasprzak, M. Kasprzak, J.H. Sokolowski, A Novel Approach to the Design and Optimization of Aluminum Cast Component Heat Treatment Processes using Advanced UMSA Physical Simulations, Journal of Achievements in Materials and Manufacturing Engineering 24/2 (2007) 139-142.
• [10] Method and Apparatus for Universal Metallurgical Simulation and Analysis -United States Patent, Patent No.: US 7,354,491 B2, Date of Patent: Apr. 8. 2008.
• [11] Universal Metallurgical Simulator and Analyzer (UMSA) Platform for the Advanced Simulation of Melting and Solidification Processes, Software Information, 2002.
• [12] http://uwindsor.ca/umsa
• [13] F.C. Robles Hernandez, J.H. Sokolowski, Thermal analysis and microscopical characterization of Al-Si hypereutectic alloys, Journal of Alloys and Compounds 419 (2006) 180-190.
• [14] L.A. Dobrzański, R. Maniara, J.H. Sokolowski, W. Kasprzak, Effect of cooling rate on the solidification behavior of AC AlSi7Cu2 alloy, Journal of Materials Processing Technology 191 (2007) 317-320.