The load capacity of PC/ABS spur gears and investigation of gear damage

• Autorzy: Yakut R. , Dozcukoglu H. , Demirci M. T.
• Języki publikacji: EN

Abstrakty

EN

Recently, Polyamide 66 and Teflon as plastic materials are widely used at the manufacturing of gear mechanism. The using of PC/ ABC materials provides many advantages due to fire, air and ultraviolet light durability and low moisture holding properties. In this study, the usability of PC/ABS composite plastic materials as spur gear was investigated. PC/ABS gears were tested by applying three different loading at two different numbers of revolutions on the FZG experiment set. As result of the experiments, load capability of PC/ABS materials was seen rather high, if one of the spur gear pair was steel (AISI 8620).

Słowa kluczowe

EN

PC/ABS material; wear; spur gear

PL

materiał PC/ABS; powłoka; przekładnia zębata

• Wydawca: Komitet Nauki o Materiałach PAN
• Czasopismo: Archives of Materials Science
• Rocznik: 2008
• Tom: Vol. 29, nr 1-2
• Strony: 84--92
• Opis fizyczny: Bibliogr. 18 poz., rys., tabl.

Twórcy

autor

Yakut R.

autor

Dozcukoglu H.

autor

Demirci M. T.

• Mechanical Education Department, University of Selcuk, Campus, Konya, Turkey,

Bibliografia

• [1] Y.K. Chen, S.N. Kukureka, C.J. Hooke, M. Rao, Surface topography and wear mechanisms in polyamide 66 and its composites, Journal of Materials Science 35 (2000) 1269-1281.
• [2] M.H. Tsai, Y.C. Tsai, A method for calculating static transmission errors of plastic spur gears using fem evaluation, Finite Elements in Analysis and Design 27 (1997) 345-357.
• [3] A.D. Lina, J.H. Kuang, Dynamic interaction between contact loads and tooth wear of engaged polyamide gear pairs, International Journal of Mechanical Sciences 50 (2008) 205-213.
• [4] C.H. Kim, Durability improvement method for polyamide spur gears, Tribology International 39 (2006) 1454-1461.
• [5] S.N. Kukureka, C.J. Hooke, M. Rao, P. Liao, Y.K Chen, The effect of fibre reinforcement on the friction and wear of polyamide 66 under dry rolling-sliding contact, Tribology International 32 (1999) 107-116.
• [6] M. Kurokawa, Y. Uchiyama, T. Iwai, S. Nagai, Performance of polyamide gear made of carbon fiber reinforced polyamide 12, Wear 254 (2003) 468-473.
• [7] M. Kurokawa, Y. Uchiyama, S. Nagai, Performance of polyamide gear made of carbon fiber reinforced poly-ether-ether-ketone: part 2, Tribology International 33 (2000) 715-721.
• [8] K. Mao, A numerical method for polyamide composite gear flash temperature prediction, Wear 262 (2007) 1321-1329.
• [9] K. Mao, A new approach for polyamide composite gear design, Wear 262 (2007) 432-441.
• [10] S. Senthilvelan, R. Gnanamoorthy, Damage mechanisms in injection molded unreinforced, glass and carbon reinforced nylon 6/6 spur gears, Applied Composite Materials 11 (2004) 377-397.
• [11] S. Senthilvelan, R. Gnanamoorthy, Damping characteristics of unreinforced, glass and carbon fiber reinforced nylon 6/6 spur gears, Polyamide Testing 25 (2006) 56-62.
• [12] S. Senthilvelan, R. Gnanamoorthy, Effect of rotational speed on the performance of unreinforced an glass fiber reinforced nylon 6 spur gears, Materials and Design 28 (2007) 765-772.
• [13] M. Taburdagitan, M. Akkok, Determination of surface temperature rise with thermo-elastic analysis of spur gears, Wear 261(2006) 656-665.
• [14] C.J. Hooke, K. Mao, D. Walton, Measurement and prediction of the surface temperature in polymer gears and its relation to surface wear, Journal of Tribology 115 (1995) 119-124.
• [15] A.R. Breeds, S.N. Kukureka, K. Mao, D. Walton, C.J. Hook, Wear behavior of cetal gear pairs, Wear 166 (1993) 85-91.
• [16] N. Tsukamoto, H. Maruyama, H. Mimura, Effect of reducing friction of polyacetal in gears, Trans JSME International Journal Series C 57 (1985) 230-235.
• [17] S. Simsek, Gears mechanism calculation methods which manufactured from plastic materials and the using areas, Master Science Thesis, Uludag University, Natural Science Institute, Bursa, 2002 (in Turkey).
• [18] R. Yakut, Load capacity of some thermoplastic gears and experimental investigation of occurring damages, Selcuk University, Natural Science Institution, Konya, 2008 (in Turkish).