Tytuł artykułu
Autorzy
Identyfikatory
Warianty tytułu
Języki publikacji
Abstrakty
Post-consumer PET (polyethylene terephthalate) containers in the Republic of Croatia are being baled and delivered to recycling plant, where they go through various phases of cleaning and separation of PET from other materials. Waste from the recycling process consists of different materials - PET, labels and sleeves (poly(vinyl chloride), paper and polystyrene) as well as caps (polypropylene and polyethylene). The intention was to make use of this waste, so mouldings were made by compression moulding and their mechanical properties were tested.
Słowa kluczowe
Wydawca
Czasopismo
Rocznik
Tom
Strony
68--72
Opis fizyczny
Bibliogr. 5 poz., rys., tabl.
Twórcy
autor
autor
autor
- Faculty of Mechanical Engineering and Naval Architecture, University of Zagreb, Ivana Lucica 5, Zagreb, Croatia, mrujnic@fsb.hr
Bibliografia
- [1] Pravilnik o ambalazi i ambalaznom otpadu, Narodne novine, broj 97, 2005.
- [2] Recovery & Recycling of PET, web-site: www.plasticseurope.org.
- [3] Deutsch Gesellschaft fur Kunststoff - Recycling: Product manual.
- [4] Design for Recyclability Guidelines, PET Bottles, web-site: www.plasticsrecycling.org.
- [5] M. Defosse, Full-body shrink-sleeve demand just keeps growing, web-site: www.modplas.com/inc/mparticle.php?section=&thefilename=worldtour06012005_11.
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-article-BOS4-0021-0037