Utilization of information system for injection molding tools

• Autorzy: Vasek S. L. , Stanek M.
• Języki publikacji: EN

Abstrakty

EN

This article describes utilization of the developed information system NAHOS for tool management system for use in injection molding to handle used tools (molds). This information system was developed in last years in cooperation of Faculty of Technology and Faculty of Applied Informatics of Tomas Bata University in Zlin, Czech Republic and in last period was applied in area of injection molding. There are some specific properties compare to tool management in other manufacturing processes, for example in machinery - much more technological information connected to own technological process, more graphical data etc. Described information system gives for users the possibility store all needed information and data as attributes of molds, use these attributes for finding appropriate tool (mold) and simple use stored data in injection molding process.

Słowa kluczowe

EN

tool management; information system; injection molding; tool

PL

zarządzanie narzędziami; system informacyjny; forma wtryskowa; narzędzie

• Wydawca: Komitet Nauki o Materiałach PAN
• Czasopismo: Archives of Materials Science
• Rocznik: 2007
• Tom: Vol. 28, nr 1-4
• Strony: 171--175
• Opis fizyczny: Bibliogr. 2 poz., rys.

Twórcy

autor

Vasek S. L.

autor

Stanek M.

• Faculty of Technology, Tomas Bata University in Zlin, Nam. TGM 275, Zlin, Czech Republic,

Bibliografia

• [1] L. Vasek, M. Hulman, Tool Management in CIM systems, Proceedings of the 10th International Research/Expert Conference “Trends in the Development of Machinery and Associated Technology” TMT 2006, Barcelona-Lloret de Mar, 2006.
• [2] Z. Molnar, B. Jufencak, P. Riessler, Informacni system podniku, Univerzita Tomase Bati ve Zline, Fakulta managementu a ekonomiky, Zlin 2001 (in Czech).