Wear of tire treads

• Autorzy: Manas D. , Manas M. , Stanek M. , Pata V.
• Języki publikacji: EN

Abstrakty

EN

Purpose: The description of new method of testing of wear of rubber parts especially wear of tire treads, is the main aim of this paper. The understanding of wear procedure could help to improve the quality of tires and other rubber parts working in heavy terrain conditions. Design/methodology/approach: For these purpose testing equipment was designed and constructed. New method of testing of wear resistance based on gravimetric determination of mass lost of testing part during the test period has been prepared and well – proven. The behaviour of testing samples during the test was monitoring using high speed video camera. Findings: Because of complexity of this problem there would be very useful to continue in this research and to describe in details the wear procedure using the new testing methods. Monitoring of wear progress by high speed video – camera may be one of the significant method. Practical implications: The main benefit for praxis could be seen in new testing method which make possible to compare different rubber compounds from the point of view of their wear (Chip - Chunk) resistance. Originality/value: Completely new in this paper is also the monitoring of wear process using high speed video - camera.

Słowa kluczowe

EN

rubber; rubber mixture; wear resistance; Chip-Chunk test; tire tread

PL

guma; mieszanka gumowa; odporność na zużycie; test Chip-Chunk; bieżnik

• Wydawca: Komitet Nauki o Materiałach PAN
• Czasopismo: Archives of Materials Science
• Rocznik: 2007
• Tom: Vol. 28, nr 1-4
• Strony: 81--89
• Opis fizyczny: Bibliogr. 9 poz., rys.

Twórcy

autor

Manas D.

autor

Manas M.

autor

Stanek M.

autor

Pata V.

• Department of Production Engineering, Faculty of Technology, Tomas Bata University in Zlin, TGM 275, 762 72 Zlin, Czech Republic,

Bibliografia

• [1] J.R. Batty, B.J. Miksh, A laboratory cutting and chipping tester for evaluation off-the-duty tires treads, Rubber chemistry and technology 55 (1989).
• [2] S.J. Johnson, Rubber processing, Hanser Publishers, Munich, 2001.
• [3] D. Manas, Rubber Workability and Wear of Rubber Parts, VUT FSI Brno, 2005.
• [4] D. Manas, M. Stanek, M. Manas, Z. Dvorak, Off - Road Tires Behavior, IRC 2005, Yokohama, 2005.
• [5] ČSN ISO 37 Curred rubber or thermoplastic rubber – Tensile properties, Prague
• [6] ATSM D2228. Standard Test Method for Rubber Property Abrasion Resistance,Prague
• [7] Pico Abrader, Annual Book of ASTM Standards, Volume 09. 01.
• [8] ATSM D5963. Standard Test Method for Rubber Property – Abrasion Resistance.
• [9] Rotary Drum Abrader, Annual Book of ASTM Standards, Volume 09. 01