Environment-friendly cutting of cylindrical gears

• Autorzy: Fratila D. F. , Gyenge C. , Ros O. R.
• Języki publikacji: EN

Abstrakty

EN

One of the main sources of environmental pollution during the machining processes is the huge amount of supplied cutting fluids. To avoid the problems caused by use of cutting fluids, considerable progress has been made in the last years in the field of near-dry machining. The conversion from conventional lubrication-cooling processes to minimal quantity lubrication methods demands new tasks classification in the tribological system in order to guarantee the process safety and product quality. In the paper the authors presents their theoretical and practical researches in the field of cylindrical gear milling using several kinds tools, lubrication and cooling methods, in order to evaluate the effects of some environment-friendly techniques.

Słowa kluczowe

EN

near-dry cutting; gear milling; environment-friendly process; minimal quantity cooling

PL

obróbka prawie na sucho; frezowanie kół zębatych; proces przyjazny środowisku; obróbka z minimalnym smarowaniem

• Wydawca: Komitet Nauki o Materiałach PAN
• Czasopismo: Archives of Materials Science
• Rocznik: 2007
• Tom: Vol. 28, nr 1-4
• Strony: 45--50
• Opis fizyczny: Bibliogr. 5 poz., rys.

Twórcy

autor

Fratila D. F.

autor

Gyenge C.

autor

Ros O. R.

• Technical University of Cluj-Napoca, Bd. Muncii 103-105, 400641 Cluj-Napoca, Romania,

Bibliografia

• [1] M. Rahman, A.S. Kumar, M.U. Salam, Experimental evaluation on effect of minimal quantity lubricant in milling, International Journal of Machine Tools and Manufacture 42 (2002) 539-547.
• [2] X.C. Tan, F. Liu, H.J. Cao, H. Zhang, A decision-making framework model of cutting fluids selection for green manufacturing and a case study, Journal of Materials Processing Technologies 129/1 (2002) 467-470.
• [3] K. Weinnert, I. Inasaki, J.W. Sutherland, T. Wakabayashi, Dry machining and minimum quantity lubrication, Annals of the CIRP 53/2 (2004) 511-537.
• [4] G. Wessel, Technologiesprung von der Minimalmengeschmierung zur Trockenbearbeitung beim spanabhebenden Trennen, Fertigungstechnisches Seminar- Fachhochschule Wedel, 2001 (in German).
• [5] D. Fratila, Cs. Gyenge, O. Ros, Near-dry machining - a modern way for reducing the ecological impact of the cutting processes, Proceedings of the 18th International DAAAM Symposium, Zadar, 2007, 289-290.