Microstructure, surface topography and properties of the Ti-6Al-4V alloy nitrided under glow discharge.

• Autorzy: Czyrska-Filemonowicz A. , Łucki M. , Buffat P.A. , Moskalewicz T. , Lekki J. , Wierzchoń T.
• Konferencja: 5th Polish-Japanese Symposium on Advanced Methods of Materials Characterization, Niedzica, 28.08-2.09.2004
• Języki publikacji: EN

Abstrakty

EN

Investigation of the microstructure, topography and properties of the as received Ti-6Al-4V alloy as well as nitrided under glow discharge was performed. The microstructural analyses were carried out using LM, XRD, SEM and analytical TEM. Phase identification and chemical composition of the layer and bulk material were determined by electron diffraction and by energy dispersive X-ray spectrometry. Atomic force microscopy was applied for layer surface topography measurements. Microhardness and Young's modulus measurements together with frictional wear resistance and corrosion resistance tests were performed. The investigation revealed a clear correlation between micro/nanostructure and surface topography of nitrided multilayer with its micro-mechanical, tribological and corrosion properties.

Słowa kluczowe

EN

microstructure; surface topography; alloy; glow discharge nitriding

PL

mikrostruktura; topografia powierzchni; stop; azotowanie jarzeniowe

• Wydawca: Komitet Nauki o Materiałach PAN
• Czasopismo: Archives of Materials Science
• Rocznik: 2005
• Tom: Vol. 26, nr 1-2
• Strony: 79--88
• Opis fizyczny: Bibliogr. 20 poz., rys.

Twórcy

autor

Czyrska-Filemonowicz A.

• Academy of Mining and Metallurgy, Al. Mickiewicza 30, 30-059 Kraków, Poland

autor

Łucki M.

• Academy of Mining and Metallurgy, Al. Mickiewicza 30, 30-059 Kraków, Poland

autor

Buffat P.A.

• Ecole Polytechnique Federale de Lausanne, CH-1015 Lausanne

autor

Moskalewicz T.

• Academy of Mining and Metallurgy, Al. Mickiewicza 30, 30-059 Kraków, Poland

autor

Lekki J.

• Institute of Nuclear Physics of the Polish Academy of Sciences, ul. Radzikowskiego 152, 31-342 Kraków, Poland

autor

Wierzchoń T.

• Warsaw University of Technology, ul. Wołoska 141, 02-507 Warszawa, Poland

Bibliografia

• [1] T. Wierzсhоń, Materials Science Forum, 4256-423, 2563 (2003).
• [2] M. Łuсki, PhD thesis, AGH University of Science and Technology, Kraków, 2004.
• [3] P. Stadelmann, JEMS Java Electron Microscopy Software, http://cimewww.epfl.ch/people/stadelmann/jemsWebSite/jems.html
• [4] J. Lekki, M. Lekka, H. Romanо, В. С1eff, Z. Stасhura, Acta Physica Polonica A 3, 315 (1996).
• [5] Advances in surface mechanical properties characterization, CSEM Instruments, Applications Bulletin 1996, N. Randal, (ed.), http://www.csem.ch/mstrum
• [6] Polish Standard PN-S3/H-D4302. Strength tests of metals.
• [7] J.P. Bahrs, E. Etchessahar, J. Debuigne, J. Less Common Metals, 52, 51 (1977).
• [8] B.V. Khaenko, Izvestiya Akademii Nauk SSSR, Neorganiczeskie Materiały, 15, 1952 (1979).
• [9] J.C. Sсhuster, J. Вauer, J. Solid State Chemistry, 53, 260 (1984).
• [10] S. Anderbouhr, S. Gilles, E. Blanquet, C. Bernard, R. Madar, Chemical Vapour Deposition, 5, 109 (1999).
• [11] D. Вhattасharyуa, G.B. Viswanathan, R. Denkenberger, D. Furrer, L. Fraser Hamish, Acta Materialia, 51, 4679 (2003).
• [12] M. Pinkas, N. Frage, N. Froumin, J. Pelleg, M.P. Dariel, J. Vacuum Science Technology, A 20, 887 (2002).
• [13] R. Yue, Y. Wang, Ch. Сben, Surface and Interface Analysis, 27, 98 (1999).
• [14] G. Chen, B. J. Sundman, J. Phase Equilibria, 19, 146 (1998).
• [15] A. Czyrska-Filemonowicz, P.A. Buffat, M. Łucki, Т. Moskalewicz, W. Rakowski, J. Lekki, Т. Wierzchoń, accepted for to Acta Materialia.
• [16] A. Czyrska-Filemonowicz, P.A. Buffat, T. Moskalewicz, K. Spiradek-Hahn, Proc. Int. Seminar on Nanotechnology for Fabrication of Hybrid Materials, 6-9.11.2002, Tateyama, Japan, K. Matsuda (ed.), 43-46 (2002).
• [17] Т. Moskalewicz, M. Kot, S. Zimowski, W. Rakowski, A. Czyrska-Filemonowiсz, Archiwum nauki o materiałach, 24, 185 (2003).
• [18] A. Wennerberg, Cells and Materials, 9, 1 (1999).
• [19] A. Ungersbock, B. Rahn, Journal of Materials Science: Materials in Medicine, 5-7, 434 (1994).
• [20] В. Cukrowska, A. Sowińska, A. Zajączkowska, J.R. Sobiecki, T. Wierzchoń, E. Czarnowska, Annals of Transplantation, 9, 1A(SuppL), 76-78 (2004).