Fabrication of the Ti3Al powders modified by niobium.

• Autorzy: Samsel K. , Garbacz H. , Oleszak D. , Kurzydłowski K.J.
• Konferencja: 5th Polish-Japanese Symposium on Advanced Methods of Materials Characterization, Niedzica, 28.08-2.09.2004
• Języki publikacji: EN

Abstrakty

EN

The paper presents results of investigations of powders of Ti3Al intermetallic phase obtained by Mechanical Alloying. Microstructures of the powders have been investigated via X-ray diffraction and analysis of SEM images. The result shows that high quality Ti3Al powders can be produced in situ by mechanical alloying of Ti, Al and Nb.

Słowa kluczowe

EN

aluminium powder; niobium; modification; fabrication

PL

proszek aluminiowy; niob; modyfikacja; produkcja

• Wydawca: Komitet Nauki o Materiałach PAN
• Czasopismo: Archives of Materials Science
• Rocznik: 2005
• Tom: Vol. 26, nr 1-2
• Strony: 37--43
• Opis fizyczny: Bibliogr. 9 poz., rys.

Twórcy

autor

Samsel K.

• Faculty of Materials Science and Engineering, Warsaw University of Technology, Wołoska 141, 02-507 Warsaw, Poland

autor

Garbacz H.

• Faculty of Materials Science and Engineering, Warsaw University of Technology, Wołoska 141, 02-507 Warsaw, Poland

autor

Oleszak D.

• Faculty of Materials Science and Engineering, Warsaw University of Technology, Wołoska 141, 02-507 Warsaw, Poland

autor

Kurzydłowski K.J.

• Faculty of Materials Science and Engineering, Warsaw University of Technology, Wołoska 141, 02-507 Warsaw, Poland

Bibliografia

• [1] J. Bystrzycki, R.A. Varin, Z. Вojar, Inż. Mater., 5, 137 (1996).
• [2] N.S. Stoioff, C.T. Liu, S.C. Deevi, Intermetallics, 8, 1313 (2000).
• [3] R.A. Varin, Inż. Mater, 1, 11 (2001).
• [4] G. Sauthoff, Intermetallics, VCH Verlagsgesellschaft, Weinheim (1995).
• [5] К. Samsel: M.Sc. Thesis, Department of Materials Science, Warsaw University of Technology (2001).
• [6] J. Dutkiewiсz, W. Maziarz, H. Heinriсh, G. Кostorz, Mater. Chem. and Phys., 81, 414 (2003).
• [7] J. Dutkiewiсz, W. Maziагz, R. Sсholz, Inż. Mater, 4, 299 (2001).
• [8] Т. Wejrzanowski, MicroMeter - M.Sc. Thesis, Department of Materials Science, Warsaw University of Technology (2000).
• [9] K.J. Кuгzуdłowski, В. Ralph, The Quantitative Description of the Microstructure of Materials, CRC Press (1995).