The design and manufacturing of prostheses in the computer aided systems CT/CAD/RP/CAM.

• Autorzy: Skalski Konstanty , Werner Andrzej

Warianty tytułu

PL

Projektowanie i wytwarzanie endoprotez w systemach komputerowego wspomagania CT/CAD/RP/CAM.

• Języki publikacji: EN

Abstrakty

EN

A modern methodology of computer aiding in the prosthesis design and manufacture process is presented in the paper. The hip joint prosthesis was utilised as an example. The whole process is realised in the integrated systems of computer tomography (CT), computer aided design (CAD), and computer aided manufacturing (CAM) on a numerically controlled machine (CNC). The process of the metal prosthesis manufacture in the CAM system is proceeded by the manufacture of epoxy physical models by means of the rapid prototyping method - stereolitography method (P-SLA).

PL

W pracy przedstawiono współczesną metodykę komputerowego wspomagania procesu projektowania i wytwarzania endoprotez na przykładzie endoprotezy stawu biodrowego. Proces jest realizowany w zintegrowanych systemach komputerowej tomografii (CT), komputerowego wspomagania projektowania (CAD) oraz wytwarzania (CAM) na obrabiarce sterowanej numerycznie (CNC). Proces wytwarzania endoprotezy w metalu w systemie (CAM) jest poprzedzony wykonaniem epoksydowych modeli fizycznych metodą szybkiego prototypowania - metodą stereolitografii (RP-SLA).

Słowa kluczowe

EN

endoprosthesis; designing; manufacturing; computer aided system; CAD/CAM systems; CT/CAD/RP/CAM; rapid prototyping

PL

endoproteza; projektowanie; wytwarzanie; system wspomagania komputerowego; system CAD/CAM; CT/CAD/RP/CAM; szybkie wykonywanie prototypów

• Wydawca: Komitet Budowy Maszyn PAN ; De Gruyter
• Czasopismo: Advances in Manufacturing Science and Technology
• Rocznik: 2001
• Tom: Vol. 25, nr 4
• Strony: 127--137

Twórcy

autor

Skalski Konstanty

• Warsaw University of Technology, Institute of Mechanics and Design, Narbutta 85, 02-524 Warsaw, Poland

autor

Werner Andrzej

• Bialystok University of Technology, Department of Machine Technology, Wiejska 45c, 15-354 Białystok, Poland

• Warsaw University of Technology, Institute of Mechanics and Design, Narbutta 85, 02-524 Warsaw, phone [phone]

Bibliografia

• [1] J.D. Reuben, C.H. Chang, J.E. Akin, D.R. Lionberger: A knowledge based computer aided design and manufacturing system for total hip replacement. Clin. Orthop. and Rel. Research, (1992)285, 48-56.
• [2] M.H. Huo, E.A. Salvati, J.R. Lieberman, A.H. Burstein, P.D. Wilson: Custom design femoral prosheses in total hip arthroplasty done with cement for severe dysplasia of the hip. J. Bone and Joint Surg., 75A (1993)10, 1497-1504.
• [3] A. Werner, Z. Lechniak, K. Skalski, K. Kędzior: Design and manufacture of anatomical human hip joint endoprosthesis using CAD/CAM Systems. J. Mater. Proc. Technol., 107 (2000), 181-186.
• [4] M. Dietrich, K. Kędzior, K. Skalski: Design and manufacturing process of the human bone endoprosthesis using computer aided systems. J. Theor. and Applied Mechanics, 3 (1999) 37, 481-503.
• [5] O. Husmann, P.J. Rubin, P.F. Leyvraz, B. Roguin, J.N. Argenson: Three dimensional morphology of the proximal femur., J. Arthroplasty, 12 (1997)4, 444-450.
• [6] T. Sakai, N. Sugano, T. Nishii, K. Haraguchi, T. Ochi, K. Ohzono: Stem length and canal filling in uncemented custom-made total hip arthroplasty. Int. Orthopaedics, (1999)23, 219-223.
• [7] S. Piszczatowski, K. Skalski: Visco-elastic analysis of the feumur-implant system by using finite element approach. Eng. Trans., 49 (2001)3-4, 375-394.
• [8] Pf. Jacobs: Rapid prototyping & manufacturing - fundamentals of stereolithography. Soc. Manuf. Eng. Publ., CAS A, 1992,
• [9] K. Skalski, M. Haraburda, K. Kędzior, M. Bossak, J. Domański: Computer technology in design of hip joint endoprostheses. Proc. 16th Int. Conf. Computer Aided Production Engineering CAPE 2000, 555-564.
• [10] D. Ma, F. Lin, K. Chua: Rapid prototyping applications in medicine. Part 1-2. Int. J. Adv. Manuf. Techn., (2001) 18, 103-117, 118-127.
• [11] R.S. Fager, K.V. Peddanarappagani, G.N. Kumar: Pixel-based reconstruction (PBR) promising simulations techniques for CT reconstruction. IEEE Trans. on Med. Imag., 12 (1993)1, 4-9.