Comparison of the theoretical load carrying capacity with the experimental data for some thin-walled plates and beams with intermediate stiffeners.

• Autorzy: Teter Andrzej , Kołakowski Zbigniew

Warianty tytułu

PL

Porównanie teoretycznych i eksperymentalnych obciążeń granicznych dla wybranych dźwigarów i płyt cienkościennych z żebrami.

• Języki publikacji: EN

Abstrakty

EN

In the present paper, an analysis of lower bound estimation of the load carrying capacity of structures with intermediate stiffeners is undertaken. Thin-walled structures with intermediate stiffeners in the elastic range, being under axial compression and a bending moment, are examined on the basis of the Byskov and Hutchinson's method and the co-operation between all the walls of the considered structures is shown. The structures are assumed to be simply supported at the ends. The study is based on the numerical method of the transition matrix, using Godunov's orthogonalization. Instead of the finite strip method, the exact transition matrix method is used in this case. In the presented method for lower bound estimation of the load carrying capacity of structures, it is postulated that the reduced local critical load should be determined taking into account the global pre-critical bending within the first order non-linear approximation to the theory of the interactive buckling of the structure. The results are compared to those obtained from the design code and the data reported by other authors. The present paper is the continuation of papers, where the interactive buckling of thin-walled beam columns with central intermediate stiffeners in the first and the second order approximation was considered. The most important advantage of this method is that it enables us to describe a complete range of behaviour of thin-walled structures from all global (flexural, flexural-torsional, lateral, distortional and their combinations) to local stability. In the solution obtained, the effects of interaction of modes, the transformation of buckling modes with an increase in load, the shear lag phanomenon and also the effect of cross-sectional distortion are included.

PL

W prezentowanej pracy wyznaczono teoretyczne wartości nośności granicznej dla cienkościennych dźwigarów i płyt z centralnymi, wzdłużnymi żebrami pośrednimi obciążonych osiową siłą ściskającą i stałym momentem gnącym. Nieliniowe zagadnienie stateczności rozwiązano stosując teorię Byskova i Hutchinsona wykorzystując w obliczeniach numeryczną metodę macierzy przejścia. W prezentowanej metodzie oszacowania współczynników redukcji sztywności wzdłużnej postuluje się wyznaczenie zredukowanego lokalnego obciążenia krytycznego z uwzględnieniem globalnego do krytycznego zginania w ramach pierwszego nieliniowego rzędu przybliżenia teorii interakcyjnego wyboczenia konstrukcji. Otrzymane wyniki porównano z wynikami opublikowanymi przez innych autorów oraz z wartościami obliczonymi wg obowiązujących norm.

Słowa kluczowe

EN

load carrying capacity; beam; thin-walled plates; stiffener

PL

obciążenie graniczne; dźwigar; płyta cienkościenna; żebro

• Wydawca: Komitet Budowy Maszyn PAN
• Czasopismo: Archive of Mechanical Engineering
• Rocznik: 2001
• Tom: Vol. 48, nr 1
• Strony: 29--54

Twórcy

autor

Teter Andrzej

• Department of Applied Mechanics, Technical University of Lublin, ul. Nadbystrzycka 36, 20-618 Lublin, Poland

autor

Kołakowski Zbigniew

• Department of Strength of Materials and Structures, Technical University of Łódź, ul. B. Stefanowskiego 1/15, 90-924 Łódź, Poland

• Department of Applied Mechanics, Technical University of Lublin, ul. Nadbystrzycka 36, 20-618 Lublin, Poland,

Bibliografia

• [1] AISI. Specification for the Design of Cold-formed Steel Structural Members. American Iron and Steel Institute, Washington, D.C., 1989.
• [2] Biderman B.L.: Mechanics of thin-walled structures – Statics. Moscow, Mashinostroenie, 1977, pp. 488 (in Russian).
• [3] BS 5950. Structural Use of Steelwork in Building — Part 5: Code of Practice for the Design of Cold Formed Sections. London 1990.
• [4] Byskov E., Hutchinson J.W.: Mode interaction in axially stiffened cylindrical shells. AIAA J., 15, 7, 1977, pp. 941-948.
• [5] Camotim D., Prola I.C.: On the stability of thin-walled columns with Z, S and sigma sections. Proc. of Second Int. Conf. on Coupled Instability in Metal Structures, Imperial Press College, 1996, pp. 149-l 56.
• [6] Cold-formed steel structures, Standards Assoc. of Australia, N.S.W., Australia, 1988.
• [7] Dubina D.: Coupled instabilities in bar members – general report. Proc. of Second Int. Conf. on Coupled Instability in Metal Structures, Imperial Press College, 1996, pp. 119-132.
• [8] Hoon K.H., Rhodes J., Seah L.K.: Tests on intermediately stiffened plate elements and beam compression elements. Thin-Walled Structures, 16, 1993, pp. 111-143.
• [9] Kołakowski Z., Teter A.: Interactive buckling of thin-walled closed elastic column-beams with intermediate stiffeners. Int. J. Solids Structures, Vol. 32, No. 11, 1995, pp. 1501-1516.
• [10] Kołakowski Z., Teter A.: Influence of local post-buckling behaviour on bending of thin-walled elastic beams with central intermediate stiffeners. Engineering Transactions, 43, 3, 1995, pp. 383-396.
• [11] Kołakowski Z., Teter A.: Interactive buckling of thin-walled beam-columns with intermediate stiffeners or/and variable thickness. Int. J. Solids Structures Vol. 37, No 24, 2000, pp. 3323-3344.
• [12] Kołakowski Z., Kowal-Michalska K., Kędziora S.: Determination of inelastic stability of thin-walled isotropic columns using elastic orthotropic plate equations. Mechanics and Mechanical Engineering, Vol. 1, No. 1, 1997, pp. 79-100.
• [13] Kołakowski Z., Kowal-Michalska K. (ed.): Selected problems of instabilities in composite structures. Series of monographies. Technical University of Lodz, 1999.
• [14] Kowal-Michalska K., Kołakowski Z., Kędziora S.: Global and local inelastic buckling of thin-walled orthotropic columns by elastic asymptotic solutions. Mechanics and Mechanical Engineering, 2, 2, 1998, pp. 209-232.
• [15] Krolak M. (ed.): Post-buckling behaviour and load carrying capacity of thin-walled plate girders. PWN, Warsaw-Lodz, 1990, p. 553.
• [16] Manevich A.I., Kołakowski Z.: Influence of local postbuckling behaviour on bending of thin-walled beams. Thin-Walled Structures, Vol. 25. No 3, 1996, pp. 219-230.
• [17] Manevich A.I., Kołakowski Z.: Multiple interaction of buckling modes and imperfection sensitivity in compressed thin-walled members. Conference of GAMM, Regensburg, 1997.
• [18] PN-90/B-03200 Konstrukcje stalowe. Obliczenia statyczne i projektowanie. Wydawnictwo Normalizacyjne, Warszawa 1994.
• [19] Teter A., Kołakowski Z.: Interactive buckling of thin-walled open elastic beam-columns with intermediate stiffeners. Int. J. Solids Structures, Vol. 33, No. 3, 1996, pp. 315-330.