Powiadomienia systemowe
- Sesja wygasła!
- Sesja wygasła!
- Sesja wygasła!
- Sesja wygasła!
- Sesja wygasła!
- Sesja wygasła!
- Sesja wygasła!
- Sesja wygasła!
- Sesja wygasła!
- Sesja wygasła!
- Sesja wygasła!
Tytuł artykułu
Autorzy
Wybrane pełne teksty z tego czasopisma
Identyfikatory
Warianty tytułu
Języki publikacji
Abstrakty
The objective of this paper is to present a simplified friction measurement test cell for measuring the friction, developed on the main components of the piston-crank-slider mechanism of an internal combustion engine, including complete piston ring packs, piston skirts, connecting rod bearings and crankshaft main bearings. In detail, the main objective of this study was to measure average friction torque absorbed by an engine in motoring conditions. The proposed cell consists of an AC electric motor driving the piston-crank-slider mechanism of a typical, small, single cylinder, four-stroke engine. Several experimental runs were performed using this cell and the obtained results were compared with results from a detailed numerical engine friction simulation code, previously developed and published by the author(s) [Livanos et al]. Good agreement was found between simulation and experimental results, indicating that the proposed cell is capable of adequately predicting the dynamic friction behaviour of rotating and oscillating engine main components.
Rocznik
Tom
Strony
61--69
Opis fizyczny
Bibliogr. 7 poz. fot., rys.
Twórcy
autor
- Technological Educational Institute of Athens
Bibliografia
- [1] Bishop. I.N. Effects of design variables on friction and economy, SAH trans., 1965, 73, 334- 358
- [2] McAulay K.J.,Wu, T., Chen, S.K.. Borman, G.L., Myers. P.S., Uyehara, O.A., Development and Evaluation of the Simulation of Compression Ignition Engine. SAE paper 650733. 1965.
- [3] Winterbone D.E., Tennant, D.W.H., The Variation of Friction and Combustion Rates during Diesel Engine Transients. SAE paper 810339, 1981.
- [4] Thiele, E. Determination of Frictional Losses in Internal Combustion Engines, Motortechnische Z., Vol. 43, pp. 253-258, 1982.
- [5] Patton, K.J., Nitschke, R.G., Heywood J.B., Development and Evaluation of a Friction Model for Spark Ignition Engines, SAE paper 890836, 1989, pp. 1441-1461.
- [6] Sandoval, D., Heywood, J.B., An Improved Friction Model for Spark Ignition Engines. SAE paper 2003-01-0725, 2003.
- [7] Livanos G.A, Kyrtatos N.P. A model of the Friction losses in Diesel Engines, SAE paper 2006-01-0888, 2006.
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-article-BOS3-0022-0007