Barium ferrite powders prepared by milling and annealing

• Autorzy: Nowosielski R. , Babilas R. , Dercz G. , Pająk L. , Wrona J.
• Języki publikacji: EN

Abstrakty

EN

Purpose: Microstructure and magnetic properties analysis of barium ferrite powder obtained by milling and heat treatment. Design/methodology/approach: the milling process was carried out in a vibratory mill, which generated vibrations of the balls and milled material in side the container during which their collisions occur. After milling process the powders were annealed in electric chamber furnace. The X-ray diffraction methods were used for qualitative phase analysis of studied powder samples. The distribution of powder particles was determined by a laser particle analyser. The magnetic hysteresis loops of examined powder material were measured by resonance vibrating sample magnetometer (R-VSM). Findings: The milling process of iron oxide and barium carbonate mixture causes decrease of the crystallite size of involved phases. The X-ray investigations of tested mixture milled for 30 hours and annealed at 950 degrees centigrade enabled the identification of hard magnetic BaFe12O19 phase and also the presence of Fe2O3 phase in examined material. The Fe2O3 phase is a rest of BaCO3 dissociation in the presence of Fe2O3, which forms a compound of BaFe12O19. The best coercive force (HC) for mixture of powders annealed at 950 degrees centigrade for 10,20 and 30 hours is 349 kA/m, 366 kA/m and 364 kA/m, respectively. The arithmetic mean of diameter of Fe2O3 and BaCO3 mixture powders after 30 hours of milling is about 6.0 micrometres. Practical implications: The barium ferrite powder obtained by milling and annealing can be suitable components to produce sintered and elastic magnets with polymer matrix. Originality/value: The results of tested barium ferrite investigations by different methods confirm their utility in the microstructure and magnetic properties analysis of powder materials.

Słowa kluczowe

EN

X-ray phase analysis; R-VSM; high-energy ball milling; barium ferrite

PL

analiza fazowa; promieniowanie rentgenowskie; R-VSM; młyn kulowy wysokoenergetyczny; ferryt baru

• Wydawca: International OCSCO World Press
• Czasopismo: Journal of Achievements in Materials and Manufacturing Engineering
• Rocznik: 2007
• Tom: Vol. 22, nr 1
• Strony: 45--48
• Opis fizyczny: Bibliogr. 15 poz., fot., rys.

Twórcy

autor

Nowosielski R.

autor

Babilas R.

autor

Dercz G.

autor

Pająk L.

autor

Wrona J.

• Division of Nanocrystalline and Functional Materials and Sustainable Pro-ecological Technologies, Institute of Engineering Materials and Biomaterials, Silesian University of Technology, ul. Konarskiego 18 a, 44-100 Gliwice, Poland,

Bibliografia

• [1] J. Qiu, M. Gu, Magnetic nanocomposite thin films of BaFe12019 and Ti02 prepared by sol-gel method, Applied Surface Science 252 (2005) 888-892.
• [2] B. Ziębowicz, D. Szewieczek, L.A. Dobrzański, New possibilities of application of composite materials with soft magnetic properties, Journal of Achievements in Materials and Manufacturing Engineering 20 (2007) 207-210.
• [3] L.A. Dobrzański, M. Drak, В. Ziębowicz, Materials with specific magnetic properties, Journal of Achievements in Materials and Manufacturing Engineering 17 (2006) 37-40.
• [4] M. Drak, L.A. Dobrzański, Corrosion of Nd-Fe-B permanent magnets, Journal of Achievements in Materials and Manufacturing Engineering 20 (2007) 239-241.
• [5] N. Shams, X. Liu, M. Matsumoto, A. Morisako, Manipulation of crystal orientation and microstructure of barium ferrite thin film, Journal of Magnetism and Magnetic Materials 290-291 (2005) 138-140.
• [6] O. Carp, R. Barjega, E. Segal, M. Brezeanu, Nonconventional methods for obtaining hexaferrites, Thermochimica Acta 318 (1998) 57-62.
• [7] J. Ding, W.F. Miao, P.G. McCormick, R. Street, Hid coercivity ferrite magnets prepared by mechanical alloying. Journal of Alloys and Compounds 281 (1998) 32-36.
• [8] A. Mali, A. Ataie, Structural characterization of nanocrystalline BaFe12019 powders synthesized by sol-gel combustion route, Scripta Materialia 53 (2005) 1065-1075.
• [9] M.H. Makled, T. Matsui, H. Tsuda, H. Mabuchi, M.K. El-Mansy, Magnetic and dynamic mechanical properties of barium ferrite-natural rubber composites, Journal of Materials Processing Technology 160 (2005) 229-233.
• [10] J. Konieczny, L.A. Dobrzański, A. Przybył, J.J. Wysłocki, Structure and magnetic properties of powder soft magnetic materials, Journal of Achievements in Materials and Manufacturing Engineering 20 (2007) 139-142.
• [11] P. Gramatyka P., A. Kolano-Burian, R. Kolano, M. Polak, Nanocrystalline iron based powder cores for high frequency applications, Journal of Achievements in Materials and Manufacturing Engineering 18 (2006) 99-102.
• [12] G. Dercz, K. Prusik, L. Pająk, Structure investigations of commercial zirconia ceramic powder, Journal of Achievements in Materials and Manufacturing Engineering 18 (2006) 259-262.
• [13] R. Nowosielski, R. Babilas, G. Dercz, L. Pająk, Microstructure of composite material with powders of barium ferrite, Journal of Achievements in Materials and Manufacturing Engineering 17 (2006) 117-120.
• [14] R. Nowosielski, R. Babilas, J. Wrona, Microstructure and magnetic properties of commercial barium ferrite powders, Journal of Achievements in Materials and Manufacturing Engineering 20 (2007) 307-310.
• [15] S. Foner, Versatile and sensitive vibrating-sample magnetometer, Revision Science Instruments 30 (1959) 548-557.