The range of applications of modernised Amsler machine in tribological examination

• Autorzy: Lenik K. , Paszeczko M. , Dziedzic K. , Barszcz M.
• Języki publikacji: EN

Abstrakty

EN

Purpose: the purpose of the study is to reveal the manner of improvement, extension of possibilities and increase of effectiveness in conducting research with the use of Amsler machine. Design/methodology/approach: In order to reach the goals further actions were provided: - The replacement of mechanical measuring unit with electronic meter circuit with the X - Y and Y - t microprocessor recorder, - Design and realization of new construction of research head, - Introduction of computer for data processing and analyzing. Findings: Applied modernization enables expansion, increase of precision and effectiveness of conducted research. As an example the further tasks of limiting of maximum temperature of lubricant in the conditions of friction pair determined loaded was presented. Research limitations/implications: Analyzed modernization of the machine refers to pin on disk unit sliding friction processes. Practical implications: Broadening of range of possibilities of data processing in tribological research conduction. Originality/value: This publication can be used by centers conducting research on tribological processes, especially on friction pairs systems, sliding friction models, in extend given: - selection of materials for friction pair elements, Analysis of research on friction and attrition processes, - Lubricant selection for specified tribological system.

Słowa kluczowe

EN

mechanical properties; effectiveness; Amsler machine; tribotester; friction

PL

właściwości mechaniczne; efektywność; maszyna Amslera; tribotester; tarcie

• Wydawca: International OCSCO World Press
• Czasopismo: Journal of Achievements in Materials and Manufacturing Engineering
• Rocznik: 2007
• Tom: Vol. 21, nr 2
• Strony: 93--96
• Opis fizyczny: Bibliogr. 15 poz., fot., rys.

Twórcy

autor

Lenik K.

autor

Paszeczko M.

autor

Dziedzic K.

autor

Barszcz M.

• Institute of Technics, Lublin University, ul. Nadbystrzycka 38, 20-618 Lublin, Poland,

Bibliografia

• [1] PN-82/H-04332, Wear Resistance Test of Metals or Their Diffusion Layers during Sliding Friction at Constant Pressure on the Amsler Machine.
• [2] PN-79/H-04329, Wear Resistance Test of Metals, their diffusive layers in process sliding friction near increasing pressure on machine Amsler.
• [3] K. Lenik, Resistance on waste eutectic covering of system Fe-Mn-C-B. Lwów. Ewroświt 2004.
• [4] A. Czerkawska, F. Dziubiński, K. Dziedzic: Computers analysis and visualization the chosen of the tribological investigations, Lublin (2005) Contained in monograph The progress in technicians the production and construction of machines, 247-254.
• [5] K. Lenik, M. Pashechko, K. Dziedzic, Temperature control in waste processed monitoring with modernized Amsler machine, XI National Conference N-T II International , Metrology in technicians production, Lublin (2005) 136-137.
• [6] M. Pashechko, K. Lenik, Segregation of atoms of the eutectic alloys Fe-Mn-C-B at friction wear, Journal of Achievements in Materials and Manufacturing Engineering. Gliwice (2005) 467-470.
• [7] B. Bhushan, B.K. Gupta, Handbook of Tribology, Materials, Coatings, and Surface Treatments, McGraw-Hill, New York, 1991.
• [8] J.B.C. Wu, J.E. Redman, Hardfacing with cobalt and nickel alloys, Welding J. 73 (1994) 63-68.
• [9] M.K. Stanford, V.K. Jain, Friction and wear characteristics of hard coatings, Wear 251 (2001) 990-996.
• [10] D. Bakley, Surface phenomena on adhesion and friction interactions. (1986).
• [11] L.M. Rybakova, L.I. Kuksionova, Structure and wear resistance of metals. Mashinostroyeniye, Moscow (1982).
• [12] M.I. Pashechko, V.M. Golubetz, M.V. Chernetz, Preparation and friction resistance of eutectic coatings. Naukova Dumka, Kyiv ( 1993).
• [13] M. Jurkovic. Research of tribological parameters in the process of drawing and selection of optimal lubricators. Faculty of Engineering. University of Rijeka. Engineering Review 16 (1996) 37-42.
• [14] Z. Jurkovic. Modelling and simulation of tool loading by machining process. Master thesis. Faculty of Engineering.University of Rijeka. 2002. (in Croatian).
• [15] C. Nyahumwa, J. Jeswiet. A Motion sensor for sheet metal rolling. Annals of the CIRP. 40 (1991) 1. 231-235.