Kinetics of chip and surface layer during cutting process.

• Autorzy: Kheifetz M. , Klimenko S. , Gawlik J. , Pytko S.

Warianty tytułu

PL

Kinetyka wióra i warstwy powierzchniowej w procesie skrawania.

• Języki publikacji: EN

Abstrakty

EN

On the basis of the characteristics of the strained condition of technological surroundings, the different mechanisms of chip formation and the forming of superficial layer in the machine part and tool during the cutting process were examined.

PL

Na podstawie charakterystyki warunków obciążenia i technologicznego otoczenia przeprowadzono badania nad różnymi mechanizmami tworzenia wióra oraz warstwy powierzchniowej na elementach maszyn i narzędziach podczas skrawania.

Słowa kluczowe

EN

cutting process; chip formation; kinetics

PL

proces skrawania; tworzenie wióra; kinetyka

• Wydawca: Komitet Budowy Maszyn PAN
• Czasopismo: Zagadnienia Eksploatacji Maszyn
• Rocznik: 2002
• Tom: Vol. 37, nr 3
• Strony: 41--50
• Opis fizyczny: Bibliogr. 15 poz.

Twórcy

autor

Kheifetz M.

• Polotsk State University, Novopolotsk 211440, Belarus

autor

Klimenko S.

• Ukraine

autor

Gawlik J.

• The Technical University in Cracow - Jana Pawła II, Poland

autor

Pytko S.

• The Technical University of Mining and Metallurgy Cracow, Poland

Bibliografia

• [1] Yashcheritsyn, P.I., Kozhuro, L.M., Senchillo, I.A., Kheifetz, M.L.: On selforganization in technological and maintenance processes when using combined methods of metal treatment. Reports of AS of Belarus. 1995, v.39, No l.-p. 112-116.
• [2] Kheifetz, M.L.: Ways to increase effectiveness of surface formation from the point of view of synergetics. Vestnik Mashinostroenia. 1994, No 2. - p. 22-25.
• [3] Kheifetz, M.L.: Ways of increasing efficiency of processes forming surfaces of friction II Proceedings of the International symposium on the tribology of friction materials'. YAROFRI - 91. - Yaroslavl, 1991, vol. II. - p. 344-349.
• [4] Kragelsky, I.V.: Friction and Wear. Moscow: Machinebuilding. 1968. - 480 p.
• [5] Kostetsky B.I., Kolesnichenko N.F.: Surface quality and friction in machines. Kiev: Technika. 1 9 69.-216 p.
• [6] Yashcheritsyn, P.I., Skorynin, J.V.: Workability of friction units of machines. Minsk: Nauka and Tecknika. 1984. - 288 p.
• [7] Vereshchaka, A.S., Tretyakov, I.P.: Cutting tools with wear-resistant coatings. Moscow: Machinebuilding. 1986. - 256 p.
• [8] Kheifetz, M.L.: Designing optimal kinds of treatment by cutting on the basis of selforganization of tribocontact processes. Friction and Wear. 1995. v. 16, No 3 - p. 545-554.
• [9] Popok, N.N., Kheifetz, M.L.: Providing rational conditions of tribocontacts when cutting difficult to treat materials and coatings. Friction and Wear. 1993, v.14, No 3. - p. 552-562.
• [10] Popok, N.N., Kheifetz, M.L., Minevich, A.A.: Contact conditions and performance of rotary cutting tools. Proceedings of the 6th International congress on tribology: EUROTRIB’93. - Budapest, 1993. v. I - p. 220-228.
• [11] Yashcheritsyn, P.I., Borisenko, A.V., Kheifetz, M.L.: Synergetic approach to metal cutting. Proceedings of AS of Belarus. Series of physical and technical sciences. - 1992, No 1 - p. 48- 53.
• [12] Kheifetz, M.L., Yashcheritsyn, P.I..: Organization and management of technological systems using combined possibilities. Problems of machinebuilding and machines reliability. RAS. - 1994, No 6 - p. 66-76.
• [13] Yavorsky, B.M., Detlaph, A.A.: Manual on Physics. Moscow: Science. 1980 - 512 p.
• [14] Kheifetz, M.L., Yashcheritsyn, P.I.: Selforganization and heredity in technological systems with combined effects. Problems of machinebuilding and reliability of machines. RAS. - 1995, No 4 -p. 61-72.
• [15] Yashcheritsyn, P.I., Borisenko, A.V., Popok, N.N., Kheifetz, M.L.: Combined method of treatment by rotation instrument with heating to be cut layer by concentrated energy flows. Reports of AS of Belarus. - 1992, v. 36, No 5. - p. 429-432.