Control of measurement equipment in the aspect of integrated quality management

• Autorzy: Karkoszka T. , Szewieczek D.
• Języki publikacji: EN

Abstrakty

EN

Purpose: of the paper has been an attainment of the confirmation that the base of improvement of production processes in the meaning of quality of products and safety workplace are the results of measurement, monitoring and analysis realised with usage of measurement equipment. Design/methodology/approach: Methodology used for the analysis has included design of the test and measurement system also measurement equipment required for the correct performance of tests. Findings: of analysis are as follows: properly designed system of management and supervision of test and measurement equipment should be capable of achieving the accurate and reliable results being the base for making subsequently relevant decisions. Practical implications: can apply in case of any organisation, which uses clearly established procedures for obtainment, identification, usage and calibration of test and measurement equipment. Originality/value: Value of the presented paper has been constituted by working out the plan of supervision of test and measurement equipment from the moment of selection criterion planning until the usage withdrawal.

Słowa kluczowe

EN

test equipment; measurement equipment; calibration

PL

wyposażenie do testów; przyrząd pomiarowy; kalibracja

• Wydawca: International OCSCO World Press
• Czasopismo: Journal of Achievements in Materials and Manufacturing Engineering
• Rocznik: 2010
• Tom: Vol. 40, nr 1
• Strony: 95--102
• Opis fizyczny: Bibliogr. 24 poz., rys., tabl.

Twórcy

autor

Karkoszka T.

autor

Szewieczek D.

• Division of Materials Processing Technology, Management and Computer Techniques in Materials Science, Institute of Engineering Materials and Biomaterials, Silesian University of Technology, ul. Konarskiego 18a, 44-100 Gliwice, Poland,

Bibliografia

• [1] E. Jarysz-Kamińska, Control of test and measurement equipment as an element of quality management system, Quality problems 1 (2007) 35 (in Polish).
• [2] PN-EN ISO 9001, Quality management system, Requirements, PKN, Warsaw, 2009.
• [3] T. Karkoszka, D. Szewieczek, Operational control in the steel wire production,Computational Materials Science and Surface Engineering 1/3 (2007) 306-319.
• [4] E. Jarysz-Kamińska, Control of test and measurement equipment. Regulations and legal requirements, Diagnostics 2/38 (2006) 129 (in Polish).
• [5] M. Urbaniak, Management systems in economic practice, Difin Publ., Warsaw, 2006 (in Polish).
• [6] W. Jakubiec, J. Malinowski, Metrology of geometric values, WNT, Warsaw, 2007 (in Polish).
• [7] P. Gniatkowski, Control of measurement and test equipment, Ministry of Economy Publ., Warsaw, 1995 (in Polish).
• [8] R. Wacławski, Measurement, Monitoring and test equipment, Ministry of Industry and Commerce Publ., Warsaw, 1994 (in Polish).
• [9] M. Michalski, Quality assurance of measurement equipment in measurement laboratory, Ministry of Industry and Commerce Publ., Warsaw, 1995 (in Polish).
• [10] M. Dudek-Burlikowska, D. Szewieczek, Quality estimation methods used in product life cycle, Journal of Achievements in Materials and Manufacturing Engineering 24/2 (2007) 203-206.
• [11] M. Dudek-Burlikowska, Analytical model of technological process correctness and its usage in industrial company, Journal of Achievements in Materials and Manufacturing Engineering 15/1-2 (2006) 107-113.
• [12] Act on Measures (Journal of Laws of 2001, no 63, it. 2441).
• [13] D. Szewieczek, M. Roszak, D. Helizanowicz, Methodology of the quality management in the productive process, Journal of Achievements in Materials and Manufacturing Engineering 30/1 (2008) 87-94.
• [14] J. Kolasa, Legalisation, authentication and calibration. Metrology in quality systems, Proceedings of the 6th Symposium of Polish ISO Forum Club, Kielce, 2000, 89 (in Polish).
• [15] PN-EN ISO/IEC 17000:2006. Conformity assessment, Terminology and principles, PKN, Warsaw, 2006.
• [16] International dictionary of basic terms in metrology, Central Office of Measures Publ., Warsaw, 1996 (in Polish).
• [17] PN-EN ISO 10012:2003 Measurement management systems. Requirements for measurement processes and measuring equipment, PKN, Warsaw, 2004.
• [18] D. Szewieczek, T. Karkoszka, A. Zając, Analysis of the clients’ satisfaction in the accredited laboratory, Journal of Achievements in Materials and Manufacturing Engineering 35/1 (2009) 95-102.
• [19] T. Karkoszka, D. Szewieczek, Risk of the processes in the aspect of quality, natural environment and occupational safety, Journal of Achievements in Materials and Manufacturing Engineering 20/1-2 (2007) 539-542.
• [20] J. Michalska, The usage of the quality - cost analysis in a production process, Journal of Achievements in Materials and Manufacturing Engineering 16/1-2 (2006) 190-198.
• [21] R. Studencki, Arrangement of safety work in organization, Silesian Technical University, Gliwice, 1996 (in Polish).
• [22] PN-N-18001. Occupational health and safety management systems. Requirements, PKN, Warsaw, 2004.
• [23] PN-EN ISO 14001. Environmental management systems. Requirements with guidance for use, PKN, Warsaw, 2004.
• [24] [...] The Timken Company Mat., Sosnowiec, 2009.