Structure and mechanical properties of PVD gradient coatings deposited onto tool steels and sialon tool ceramics

• Autorzy: Dobrzański L. A. , Staszuk M. , Křiž A. , Lukaszkowicz K.
• Języki publikacji: EN

Abstrakty

EN

Purpose: The paper presents investigation results of the structure and mechanical properties of gradient coatings deposited by cathodic arc evaporation - physical vapour deposition (CAE-PVD) techniques onto the X40CrMoV5-1 hot work tool steel, HS6-5-2 high speed steel and SiAlON tool ceramics. The Ti(C,N), (Ti,Al)N and (Al,Si,Cr) N coatings were investigated. Design/methodology/approach: Microstructure was characterised using scanning and transmission electron microscopy. The phase composition of the investigated coatings was determined by means of the X-ray diffractometer. The chemical concentration changes of the coating components, and the substrate material were evaluated in virtue of tests carried out in the GDOS spectrometer. Tests of the coatings’ adhesion to the substrate material were made using the scratch test method. Findings: It was found out that the structure of the PVD coatings deposited onto all substrates is composed of fine crystallites. The investigations made by use of the glow discharge optical emission spectrometer indicate to the existence of the transition zone between the substrate material and the coating. The results show that all coatings present good adhesion. The critical load LC2, which is in the range 35-90 N, depends on the coating type and substrate. Good adhesion of the coatings deposited to the substrate should be connected with the existence of the transition zone. All the coatings are demonstrated by high hardness. Research limitations/implications: Ti(C,N), (Ti,Al)N and (Al,Si,Cr) N gradient coatings can be applied for cutting tools and hot working tools. Originality/value: Working out and testing PVD coatings obtained by tool ceramic and tool steels is a special future of development direction in a domain of thin coatings.

Słowa kluczowe

EN

thin coating; thick coating; surface treatment; mechanical properties

PL

cienka powłoka; gruba powłoka; obróbka powierzchni; właściwości mechaniczne

• Wydawca: International OCSCO World Press
• Czasopismo: Journal of Achievements in Materials and Manufacturing Engineering
• Rocznik: 2009
• Tom: Vol. 37, nr 1
• Strony: 36--43
• Opis fizyczny: Bibliogr. 15 poz., rys., tabl.

Twórcy

autor

Dobrzański L. A.

autor

Staszuk M.

autor

Křiž A.

autor

Lukaszkowicz K.

• Division of Materials Processing Technology, Management and Computer Techniques in Materials Science, Institute of Engineering Materials and Biomaterials, Silesian University of Technology, ul. Konarskiego 18a, 44-100 Gliwice, Poland,

Bibliografia

• [1] A. A. Voevodin, J. S. Zabinski, C. Muratore, Recent Advances in Hard, Tough, and Low Friction Nanocomposite Coatings, Tsinghua Science and Technology 10 (2005) 665-679.
• [2] I. Dahan, U. Admon, N. Frage, J. Sariel, M .P. Dariel, J. J. Moore, The development of a functionally graded TiC-Timultilayer hard coatings, Surface and Coatings Technology 137 (2001) 111-115.
• [3] U. Schulz, M. Peters, F. W. Bach, G. Tegeder, Graded coatings for thermal, wear and corrosion barriers, Materials Science and Engineering 362 (2003) 61-80.
• [4] H. Jihua, L. Jinfeng, K. Akira, W. Ryuzo, A new method for fabrication of functionally gradient materials, Journal of Materials Science Letters 17 (1998) 2033-2035.
• [5] L. A. Dobrzański, K. Gołombek, Structure and properties of the cutting tools made from cemented carbides and cermets with the TiN+mono-, gradient- or multi (Ti, Al, Si)N+TiN Nanocrystalline coatings, Journal of Materials Processing Technology 164-165 (2005) 805-815.
• [6] L. A. Dobrzański, S. Skrzypek, D. Pakuła, J. Mikuła, A. Kriz, Influence of the PVD and CVD technologies on the residual macro-stresses and functional properties of the coated tool ceramics, Journal of Achievements in Materials and Manufacturing Engineering 35/2 (2009) 162-168.
• [7] L. A. Dobrzański, K. Gołombek, J. Mikuła, D. Pakuła, Multilayer and gradient PVD coatings on the sintered tool materials, Journal of Achievements in Materials and Manufacturing Engineering 31/2 (2008) 170-190.
• [8] L. A. Dobrzański, M. Staszuk, J. Konieczny, W. Kwaśny, M. Pawlyta, Structure of TiBN coatings deposited onto cemented carbides and sialon tool ceramics, Archives of Materials Science and Engineering 38/1 (2009) 48-54.
• [9] L. A. Dobrzański, Engineering materials and materials design. Fundamentals of materials science and physical metallurgy, WNT, Warsaw-Gliwice, 2006 (in Polish).
• [10] M. Kupczyk, Surface engineering. Wear resistant coatings for cutting edges, Poznan University of Technology Publishing House, Poznan, 2004 (in Polish).
• [11] H. Mandal, New developments in α-SiAlON ceramics, Journal of the European Ceramic Society 19 (1999) 2349- 2357.
• [12] L. Chen, E. Kny, G. Groboth, Sialon ceramic with gradient microstructures, Surface Coating and Technology 100-101 (1998) 320-323.
• [13] S. Kurama, The effects of processing on the 􀄮 􀄼 􀈕 SiAlON transformation during cycling heat treatments, Materials Science and Engineering 487/1-2 (2008) 278-288.
• [14] B. Bitterlich, S. Bitsch, K. Friederich, SiAlON based ceramic cutting tools, Journal of the European Ceramic Society 28 5 (2008) 989-994.
• [15] P. J. Burnett, D. S. Rickerby, The relationship between hardness and scratch adhesion, Thin Solid Films 154 (1987) 403-416.