Investigation of processing properties of polyamide filled with hard coal

• Autorzy: Stabik J. , Suchoń Ł. , Rojek M. , Szczepanik M.
• Języki publikacji: EN

Abstrakty

EN

Purpose: The aim of this article is to present the influence of contents and kind of hard coal used as powder filler on rheological properties (viscosity) of polyamide 6. Design/methodology/approach: Preparation of composite of polyamide 6 with hard coal was carried out on laboratory twin screw extruder. Extruded composite was granulated and in this form was used for MFR analysis. Taking into account MFR results viscosity was calculated. The influence of filler content on viscosity was next searched. Findings: Results of research showed that addition of powdered hard coal to polyamide 6 matrix cause pronounced decrease of MFR index. In this way significant increase of viscous flow was observed. It is often observed phenomenon for polymer composite filled with powder materials. Research limitations/implications: It is necessary to carry out the research with surface modified hard coal with coupling agents which provide better adhesion of polymer matrix to filler. Practical implications: Hard coal used as a filler in composites makes it possible to gain new and cheaper polymeric materials with many possible applications. Originality/value: Investigation described in article shows possibility of hard coal application as innovatory filler of polymers. The influence of this filler on rheological properties indicate that processing of these new materials may be accompanied with some problems.

Słowa kluczowe

EN

composite; working properties; hard coal; engineering material

PL

kompozyt; właściwości robocze; węgiel kamienny; materiał inżynieryjny

• Wydawca: International OCSCO World Press
• Czasopismo: Journal of Achievements in Materials and Manufacturing Engineering
• Rocznik: 2009
• Tom: Vol. 33, nr 2
• Strony: 142--149
• Opis fizyczny: Bibliogr. 21 poz., rys., tabl.

Twórcy

autor

Stabik J.

autor

Suchoń Ł.

autor

Rojek M.

autor

Szczepanik M.

• Division of of Metal and Polymer Materials Processing, Institute of Engineering Materials and Biomaterials, Silesian University of Technology, ul. Konarskiego 18a, 44-100 Gliwice, Poland,

Bibliografia

• [1] L. A. Dobrzański, Foundation of materials knowledge and materials science, WNT, Warsaw, 2002, (in Polish).
• [2] J. Stabik, Selected issues of filled thermoplastic rheology, Publishing house Silesian University of technology, Gliwice, 2004, (in Polish).
• [3] J. Stabik, Influence of filler grain geometry on thermoplastic polymers viscosity, 8 seminar plastics in machine design, Krakow, 1997, (in Polish).
• [4] D. Żuchowska, Construction polymers materials, WNT, Warsaw, 2000, (in Polish).
• [5] M. Szczepanik, J. Stabik, Review of polymer composite materials with coal filler. Publishing House Silesian University of Technology, Gliwice, 2008, (in Polish).
• [6] A. Boczkowska, J. Kapuściński, Z. Lindermann, Compo-sites, OWPW, Warsaw, 2003 (in Polish).
• [7] L. A. Pilato, M. J. Michno, Advanced composite materials, Springer-Verlag, Berlin, 1994.
• [8] Z. Brojer, Z Hertz, P. Penczek, Epoxide resins, WNT, Warsaw, 1982, (in Polish).
• [9] A. Eichert, Z. Kornetka, Role of coupling agents In system polymer filler, Polymers- High Molecular Mass Materials 5 (1997) 331-336, (in Polish).
• [10] Polish standard PN-93/C-89069.
• [11] T. Broniewski, Methods of researching and appraising polymer materials properties, WNT, Warsaw, 2000, (in Polish).
• [12] Z. Kembłowski, Rheometry of non Newtonian fluids, WNT, Warsaw, 1973, (in Polish).
• [13] Z. Kembłowski, T. Kiljański, Laboratory exercises of technical rheometry, Publishing House University of Technology in Lodz, Łódź, 1993 (in Polish).
• [14] W. Przygocki, Physics of polymers, selected issues, PWN, Warsaw, 2001, (in Polish).
• [15] B. Metzner, Reology of suspension in polimeric liquids, Journal of Rheology 29 (1985) 739-775.
• [16] P. Wasilewski, E. Kobel-Najzarek, Chemistry and chemical technology of hard coal, Publishing house Silesian university of technology, Gliwice, 1984. (in Polish).
• [17] J. Stabik, A. Dybowska, Electrical and tribological properties of gradient epoxy-graphite composites, Journal of Achievements in Materials and Manufacturing Engineering 27/1 (2007) 39-42.
• [18] J. Stabik, A. Dybowska, Methods of preparing polymeric gradient composites, Journal of Achievements in Materials and Manufacturing Engineering 25/1 (2007) 67-70.
• [19] Gnatowski, J. Koszkul, Investigations of the influence of filler on the properties of chosen polymer blends with compatibilizer addition, Proceedings of the 13th Scientific International Conference “Achievements in Mechanical and Materials Engineering”, AMME’2005, Gliwice-Wisła, 2005, 247-250.
• [20] L. A. Dobrzański, A. Kloc-Ptaszna, A. Dybowska, G. Matula, E. Gordo, J.M. Torralba, Effect of WC concentration on structure and properties of the gradient tool materials, Journal of Achievements in Materials and Manufacturing Engineering 20 (2007) 91-94.
• [21] J. Nabiałek, J. Koszkul, The polymers flow in a mold cavity during the injection molding process. Comparison of an experiment and computer simulations, Proceedings of the 12th International Scientific Conference “Achievements in Mechanical and Materials Engineering” AMME’2003, Gliwice - Zakopane, 2003, 641-644.