Quantification of cutting performance with tools treated with advanced coatings.

• Autorzy: Grzesik W.

Warianty tytułu

PL

Ocena przebiegu procesu skrawania narzędziami z nałożonymi powłokami.

• Języki publikacji: EN

Abstrakty

EN

The paper summarises the state-of-the-art knowledge in modern coting technologies applied to cutting tools. Current industrial applications of tool coated with hard and/or soft layers of different structures and wear resistance for high performance machining are presented. Moreover, new trends in the cutting-tool coating area are specified based of the newest data presented on the website of world-class leaders in tooling for metal cutting applications. Results of experimental and analytical investigations of the contact temperature, friction and heat transfer during cutting of steels with coated tools are presented. The data obtained can be used for the selection of the appropriate cutting conditions in cutting steels with coated tools.

PL

Praca przedstawia aktualny stan wiedzy z zakresu nowoczesnych technologii nanoszenia powłok na narzędzia skrawające. Dokonano przeglądu zastosowań twardych i/lub miękkich powłok o różnej strukturze i odporności na ścieranie w skrawaniu na sucho, z minimalnym wydatkiem medium smarującego i na twardo. Przedstawiono wyniki badań temperatury kontaktowej, tarcia oraz wymiany ciepła podczas skrawania różnych materiałów, umożliwiających dobór powłok przeciwściernych przy wytwarzaniu narzędzi skrawających.

Słowa kluczowe

EN

cutting tool coating; metal cutting; process characteristics

PL

powłoka narzędziowa; skrawanie; charakterystyka procesu

• Wydawca: Komitet Budowy Maszyn PAN ; De Gruyter
• Czasopismo: Advances in Manufacturing Science and Technology
• Rocznik: 2002
• Tom: Vol. 26, nr 4
• Strony: 69--83
• Opis fizyczny: Bibliogr. 19 poz., rys., tab.

Twórcy

autor

Grzesik W.

• Technical University of Opole, Faculty of Mechanical Engineering, ul. Mikołajczyka 5, 45-271 Opole, phone [phone], fax [phone]

Bibliografia

• [1] M.F. HUSTON, G.W. KNOBELOCH: Cutting materials, tools, market trends in the USA. VDI Berichte, (1998)1399, 21-53.
• [2] W.R. PFOUTS: Cutting edge coatings. Manuf. Eng., 125(2000)1, 98-107.
• [3] F. KLOCKE, T. KRIEG: Coated tools for metal cutting-features and applications. Annals CIRP, 48(1999)2, 1-11.
• [4] H.G. PRENGEL, W.R. PFOUTS, A.T. SANTHANAN: State of the art in hard coatings for cutting tools. Surf. Coat. Technol., 102(1998), 183-190.
• [5] Internet, www.balzers.com., www.guehring.com., mitsubishicarbide.jp.
• [6] W. GRZESIK: Improvement of cutting performance by means of advanced tool coatings. Proc. 2nd Int. Conf. on Advances in Production Engineering (APE'2001), Pt. II. Warsaw 2001, 179-188.
• [7] ASM Handbook. Vol. 5. Surface Engineering. ASM Inter., Materials Park 1994.
• [8] W. GRZESIK, Advanced protective coatings for manufacturing and engineering. Hanser Gardner, Cincinnati 2002 (in press).
• [9] K. KATBI: Thin is for tool coatings. American Machinist, 143(1999)10, 116-118.
• [10] Y. HASHIMOTO, K. YAMAGATA et al.: Development of a TiN/AlN superlattice and its application to cutting tools. SIE Technical Review, 49(1998)7, 118-122.
• [11] W. GRZESIK: The role of coatings in controlling the cutting process when turning with coated indexable inserts. J. Mater. Proc. Technol., 37(1998), 133-143.
• [12] W. GRZESIK: The influence of thin hard coatings on frictional behaviour in the orthogonal cutting process. Tribol. Internat., 33(2000), 131-140.
• [13] W. GRZESIK: An integrated approach to evaluating the tribo-contact for coated cutting inserts. Wear, 240(2000), 9-18.
• [14] T. KATO, H. FUJII: Energy partition in conventional surface grinding. ASME Trans., J. Manuf. Sci. Engng., 121(1999), 393-398.
• [15] W. GRZESIK: An investigation of the thermal effects in orthogonal cutting associated with multilayer coatings. Annals CIRP, 50(2001)1, 53-56.
• [16] S. HOGMARK, P. HEDENQUIST, S. JACOBSON: Tribological properties of thin hard coatings: demands and evaluation. Surf. Coat. Technol., 90(1997), 247-257.
• [17] F. KLOCKE, T. KRIEG, K. GERSCHWILER et al.: Improved cutting processes with adapted coating systems. Annals CIRP, 47(1998)1, 65-68.
• [18] F. KLOCKE, G. EISENBLÄTTER: Dry cutting-state of research. VDI Berichte, (1998)1399, 159-188.
• [19] W. GRZESIK, Z. ZALISZ, P. NIESŁONY: Friction and wear testing of multilayer coatings on carbide substrates for dry machining applications. Surf. Coat. Technol., 155(2002)1, 37-45.