The effect of retained austenite on steel fracture toughness.

• Autorzy: Kokosza A. , Pacyna J.
• Konferencja: AMT'98 XVth Physical Metallurgy and Materials Science Conference 'Advanced Materials & Technologies', 17-21 May, 1998, Kraków-Krynica, Poland
• Języki publikacji: PL

Abstrakty

EN

This paper is an attempt of reviewing the outlooks about the favourable influence of retained austenite on fracture toughness of tool steels. The tests were performed on the samples made of the new 70HG2MF steel in which the fraction of retained austenite was changed by subquenching or by changing the austenitizing temperature. It was revealed that in the subquenched samples retained austenite affects strongly the increase of fracture toughness. On the other hand, however, in the samples austenitized at growing temperatures, the effect of this phase on fracture toughness is not so univocal since not only the volume fraction of retained austenite is subject to changes but also the character of fractures and the grain size.

Słowa kluczowe

PL

austenit szczątkowy; stal narzędziowa; odporność na kruche pękanie; wymrażanie; skład chemiczny; dyfrakcja promieniowania rentgenowskiego; pęknięcie; współczynnik intensywności naprężeń

EN

retained austenite; tool steel; fracture toughness; subquenching; chemical composition; X-ray diffraction; crack; stress intensity coefficient

• Wydawca: Wydawnictwo SIGMA-NOT
• Czasopismo: Inżynieria Materiałowa
• Rocznik: 1998
• Tom: R. XIX, nr 4
• Strony: 1248--1253
• Opis fizyczny: Bibliogr. 6 poz., tab., rys.

Twórcy

autor

Kokosza A.

• Faculty of Metallurgy and Materials Science, University of Mining and Metallurgy, Krakow, Poland

autor

Pacyna J.

• Faculty of Metallurgy and Materials Science, University of Mining and Metallurgy, Krakow, Poland

• University of Mining and Metallurgy, Faculty of Metallurgy and Materials Science, Kraków

Bibliografia

• [1] Zackay V.F., Parker E.R., Wood W.E.: [In:] Proc.3rd Intern. Conf. on the Strenght of Metals and Alloys, Cambridge 1973; [eds.:] The Institute of Metals and Iron and Steel Institute, Cambridge 1973, p. 175/179.
• [2] Lai G.Y., Wood W.E., Clark R.A., Zackay V.F., Parker E.R.: Met. Trans. 5 (1974) No. 7, P. 1663/70.
• [3] Pacyna J., Mazur A.: Metalurgia i Odlewnictwo 3,(1981) s.329, 341.
• [4] Pacyna J., Mazur A.: Metalurgia i Odlewnictwo 4,(1981) s.491.
• [5] Pacyna J., Mazur A.: Metalurgia i Odlewnictwo 3,(1982) s.83.
• [6] Pacyna J.: Steel Research, 63 (1992), No. 11, p 500.