Influence of the production parameters on the properties of the sinters made from displaced copper powders.

• Autorzy: Leżański J. , Gacek S. , Radoń A. , Olszewska I.
• Konferencja: AMT'98 XVth Physical Metallurgy and Materials Science Conference 'Advanced Materials & Technologies', 17-21 May, 1998, Kraków-Krynica, Poland
• Języki publikacji: EN

Abstrakty

EN

In this paper the production parameters influence on the properties of sinters made from copper powder which are obtained on the first stage of hydrometallurgical processing by displacing from copper fire scale, are presented. Pressed powder compacts density and sinters density were investigated. Also sinters bending strength, hardness, electric resistance were measured and sinters structure was observed and analysed. In described experiment sinters with very high properties were obtained and this indicate high suitability of the use of hydrometallurgical copper powders for application in powder metallurgy technology.

Słowa kluczowe

EN

copper powder; sinter; powder compact; hydrometallurgy; density; bending strength; hardness; electric resistance

PL

miedź w proszku; spiek; wypraska proszkowa; hydrometalurgia; gęstość; wytrzymałość na zginanie; twardość; opór elektryczny

• Wydawca: Wydawnictwo SIGMA-NOT
• Czasopismo: Inżynieria Materiałowa
• Rocznik: 1998
• Tom: R. XIX, nr 4
• Strony: 1203--1205

Twórcy

autor

Leżański J.

autor

Gacek S.

autor

Radoń A.

autor

Olszewska I.

• University of Mining and Metallurgy, Faculty of Metallurgy and Material Science, Kraków