Dimensional changes during sintering of manganese-carbon steel compacts.

• Autorzy: Pieczonka T. , Mitchell S.C. , Ciaś A. , Sułowski M. , Wronski A.S.
• Konferencja: AMT'98 XVth Physical Metallurgy and Materials Science Conference 'Advanced Materials & Technologies', 17-21 May, 1998, Kraków-Krynica, Poland
• Języki publikacji: EN

Abstrakty

EN

Sintering behaviour in high purity hydrogen of Hoganas NC 100.24 iron powder with carbon and two different types of ferromanganese additions was investigated. The influence of different manganese contents (3.0 and 4.0 wt.-%), type of ferromanganese used (low and high carbon) and isothermal sintering temperature (1120, 1240 and 1300 degrees centigrade) on dimensional changes was investigated by dilatometry. It is shown that the dimensional changes occuring during heating and isothermal sintering and the final density of sintered compacts are influenced by manganese and carbon through their interactions with base iron. The results assist in the choice of industrial sintering conditions when the requirement is very small dimensional changes of compacts for a range of manganese and carbon contents.

Słowa kluczowe

EN

sintering; ferromanganese; iron powder; carbon; steel; isothermal sintering; compact; dimension; dilatometer

PL

spiekanie; żelazomangan; żelazo w proszku; węgiel; stal; wypraska; wymiar; dylatometr

• Wydawca: Wydawnictwo SIGMA-NOT
• Czasopismo: Inżynieria Materiałowa
• Rocznik: 1998
• Tom: R. XIX, nr 4
• Strony: 1171--1174

Twórcy

autor

Pieczonka T.

autor

Mitchell S.C.

autor

Ciaś A.

autor

Sułowski M.

autor

Wronski A.S.

• University of Mining and Metallurgy, Department of Metallurgy and Materials Engineering