Multilayer laser cladding of bronze powder for fast prototyping.

• Autorzy: Jendrzejewski R. , Śliwiński G.
• Konferencja: AMT'98 XVth Physical Metallurgy and Materials Science Conference 'Advanced Materials & Technologies', 17-21 May, 1998, Kraków-Krynica, Poland
• Języki publikacji: PL

Abstrakty

EN

Process parameters of the multilayer laser cladding of the bronze B10 alloy powder are experimentally investigated. The 3-D structures are prepared trace-on-trace by remelting of the powder injected into the processing zone through a nozzle. An efficient formation of the volumetric structures of controlled geometry is observed. Microanalysis of the samples confirm the expected mechanical properties, low porosity and the highly homogeneous structure of the multilayers. For the subsequent clads of 1 mm width and 0,6 mm in height produced at velocities of 1m/min. the process efficiency of about 5% is obtained.

Słowa kluczowe

PL

platerowanie laserowe; proszek metalowy; brąz; platerowanie wielowarstwowe; mikroanaliza; własności mechaniczne; szybkie prototypowanie

EN

laser cladding; metal powder; bronze; multilayer cladding; microanalysis; mechanical properties; fast prototyping

• Wydawca: Wydawnictwo SIGMA-NOT
• Czasopismo: Inżynieria Materiałowa
• Rocznik: 1998
• Tom: R. XIX, nr 4
• Strony: 1100--1103

Twórcy

autor

Jendrzejewski R.

autor

Śliwiński G.

• Polish Academy of Sciences, Institute of Fluid-Flow Machinery, Gdańsk