Structure and properties of TBC coatings obtained on the nickel base superalloys by a thermal spraying method.

• Autorzy: Swadźba L. , Hetmańczyk M. , Mendala B. , Dudek S. , Szala J.
• Konferencja: AMT'98 XVth Physical Metallurgy and Materials Science Conference 'Advanced materials & technologies' 17-21 May, 1998, Kraków-Krynica, Poland.
• Języki publikacji: EN

Abstrakty

EN

Results of investigations on obtaining the thermal barrier coatings (TBC) and their properties have been presented in the article. Coatings were formed by a thermal spraying method using a A3000 system controlled by computer and with a robot. For spraying the following materials: ZrO2xY2O3 and MeCrAlY as an interlayer were used. The coating structure examinations were made. Powder morphology was determined by the scanning microscope method. Tests by the thermal shock method were conducted in the air atmosphere by heating the specimens to 1200 degrees centigrade for 15 min. and cooling to 250 degrees centigrade for 5 min. Hot corrosion resistance tests were conducted at 900 degrees centigrade in the Na2SO4 medium. Tests showed low resistance of TBC coatings to that type of corrosion. The TBC coatings were formed on the combustion chamber elements.

Słowa kluczowe

EN

gas turbine; turbine engine; thermal barrier coating; interlayer; superalloy; nickel; nickel-base superalloys; thermal spraying; thermal deformation; hot corrosion resistance; thermal shock resistance

PL

turbina gazowa; silnik turbinowy; powlekanie; bariera cieplna; warstwa pośrednia; nadstop; nikiel; napylanie termiczne; mikroskop skaningowy; ceramika; napylanie plazmowe; odkształcenie cieplne; odporność korozyjna wysokotemperaturowa; odporność na wstrząsy cieplne

• Wydawca: Wydawnictwo SIGMA-NOT
• Czasopismo: Inżynieria Materiałowa
• Rocznik: 1998
• Tom: R. XIX, nr 4
• Strony: 1061--1066
• Opis fizyczny: Bibliogr.12.poz. rys.

Twórcy

autor

Swadźba L.

• Silesian Technical University, Institute of Materials Science and Engineering, Katowce

autor

Hetmańczyk M.

• Silesian Technical University, Institute of Materials Science and Engineering, Katowce

autor

Mendala B.

• Silesian Technical University, Institute of Materials Science and Engineering, Katowce

autor

Dudek S.

• Transport Equipment Enterprise "PZL-Rzeszów"

autor

Szala J.

• Silesian Technical University, Institute of Materials Science and Engineering, Katowce

• Silesian Technical University, Institute of Materials Science and Engineering

Bibliografia

• [1] A.K. Koul, V.R. Parameswaran, and all. Advanced in High Temperature Structural Materials and Protective Coatings, National Research Council of Canada, 1994.
• [2] M. Meier D.K. Gupta, K.D. Sheffler: JOM, March (1991) 50-53.
• [3] J.Wortman, B.A. Nagraj and all: Materials Science and Engineering, A 121 (1 989) 433-440
• [4] K.D.Sheffler, D.K. Gupta, Journal of Engineering for Gas Turbines and Power, October 1988, v. 110, 605-609.
• [5] T.N. Rhys-Jones, Corrosion Science, V.29, No 6, pp.623, 1989.
• [6] F.C.Toriz, A.B. Thakker and S.K. Gupta, Surface and Coatings Technology, 39/40 (1989), 161-172
• [7] W.J. Brindley, R. A. Miler, Adv. Materials and Processes 8/89, 29-33.
• [8] G.W. Meetham, Materials Science and Technology, March 1986, v. 2.
• [9] B.J. Gill and F.L.Ridding, Surface Engineering Engineering, 1986, v. 2 No 3, 169-175
• [10] Ch. Mertens-Lecomte, D. Muck, J.Garcia, Materials for Advanced Power Engineering 1994, Part II Ed. D. Coutsouradis, Kluwer Academic Publishers, pp. 1313-1321
• [11] A.Maciejny, L.Swadźba, B. Formanek, B. Mendala, Materials for Advanced Power Eng. 1994. Part II Ed. D. Coutsouradis, Kluwer Academic Publishers, pp. 1291-1302.
• [12] L. Swadźba, et all., Thermal Spraying Conference, Aachen, Germany, 3-5 March 1993.