Structure and properties of TiN and Ti(C,N) coatings on Co high-speed steels.

• Autorzy: Dobrzański L.A. , Adamiak M.
• Konferencja: AMT'98 XVth Physical Metallurgy and Materials Science Conference 'Advanced materials & technologies' 17-21 May, 1998, Kraków-Krynica, Poland.
• Języki publikacji: EN

Abstrakty

EN

The paper present results of investigations of the type base material of the W-Mo-V-Co+Si, with economically adjusted chemical composition on structure and properties of hard, wear resistant coatings of titanium nitride TiN and titanium carbonitride Ti(C,N), deposited in the PVD process. It was shown that high-speed steels containing 9%-11% tungsten, 2% molybdenum and limited the Co concentration from 10% to about 5%, coated in the PVD process expose properties comparable with the ones obtained on the others high-speed steels grades. This makes it possible to employ in practice the high-speed steels with relatively low concentration of the alloying elements instead of the high-alloy cobalt steels, provided the base heat treatment is carried out so that it ensures the maximum secondary hardness.

Słowa kluczowe

EN

wear resistance; coating; titanium nitride; titanium carbonitride; PVD; high-speed steel; heat treatment; hardness

PL

odporność na zużycie; powłoka; azotek tytanu (TiN); węglikoazotek tytanu; PVD; stal szybkotnąca; obróbka cieplna; twardość

• Wydawca: Wydawnictwo SIGMA-NOT
• Czasopismo: Inżynieria Materiałowa
• Rocznik: 1998
• Tom: R. XIX, nr 4
• Strony: 986--987
• Opis fizyczny: Bibliogr. 6 poz., rys.

Twórcy

autor

Dobrzański L.A.

• Silesian Technical University, Institute of Engineering Materials and Biomaterials, Gliwice, Poland

autor

Adamiak M.

• Silesian Technical University, Institute of Engineering Materials and Biomaterials, Gliwice, Poland

• Silesian Technical University, Institute of Engineering Materials and Biomaterials

Bibliografia

• [1] Van Stappen, L. M. Stals, M. Kerkhofs, C. Quaeykaegens, Surf. And Coat. Tech., 74/75 (1995) 629
• [2] Dobrzański L.A.: Proc. 2nd Australian Int. Conf. Surface Engineering Coatings and Surface Treatments in Manufacturing, Adelaide, vol. 1(1994) K55.
• [3] Dobrzański L.A, Adamiak M., D’Errico G. E, Proc. of the Intern. Conf. on Advances in Materials and Processing Technologies (AMPT’97), Guimaraes, Vol. I (1997) 306.
• [4] Materials and Processing Technologies (AMPI 97), Gumaraes, vol. 1 (1996) 933.
• [5] Dobrzański L.A., Kasprzak W. Zarychta A. Ligarski M., Mazurkiewicz J., J. Mat. Proc.Tech., 63 (1997) 93.
• [6] Dobrzański L.A, Adamiak M, Kasprzak W., Proc. of the Intern. Conf. „Challenges to Civil ad Mechanical Engineering in 2000 and Beyound CCEM’97”, Wrocław (1997) 305.