Tytuł artykułu
Identyfikatory
Warianty tytułu
Konferencja
XV Physical Metallurgy and Materials Science Conference on Advanced Materials & Technologies AMT'98, Kraków-Krynica, Poland, 17-21 May, 1998
Języki publikacji
Abstrakty
Sintered Pr20Fe74B4Cu2 magnets having equiaxed Pr2Fe14B grain morphologies and different starting structural anisotropies were die upset-forged. The c-axis alignments following forging were analysed by measurements of magnetic properties and observations of domain structure. It was found that the hot worked magnets exhibited c-axis alignment parallel to the pressing direction which was independent of the initial anisotropy. This confirms the texturing model based on mass transfer via liquid grain boundary phase.
Wydawca
Czasopismo
Rocznik
Tom
Strony
832--835
Opis fizyczny
Bibliogr. 8 poz., tab., rys.
Twórcy
autor
- Faculty of Materials Science and Engineering, Warsaw University of Technology, Poland
autor
- Faculty of Materials Science and Engineering, Warsaw University of Technology, Poland
autor
- Department of Engineering Materials, The University of Sheffield, UK
autor
- Department of Engineering Materials, The University of Sheffield, UK
- Warsaw University of Technology, Faculty of Materials Science and Engineering
Bibliografia
- [1] M. Sagawa, S. Fujimura, N. Togawa, H. Yamamoto and Y. Matsuura, J.Appl. Phys. 1984, 55, 2083
- [2] R.W. Lee, Appl. Phys. Lett. 1985, 46, 790.
- [3] M. Leonowicz and H.A. Davies, Proc. 13 Int. Workshop on Rare-Earth Magnets and Their Appl., Ed. CAF. Manwaring et. al, Birmingham, U. K., Sept. 11-14, 1994, p. 623.
- [4] R.K. Mishra, J. Appl. Phys. 62 (1987) 967.
- [5] Lin Li and C.D. Graham Jr, IEEE Tams. Magn. 28 (1992) 2130.
- [6] T. Yuri and T. Ohki Proc. 13th Int. Workshop on Rare-Earth Magnets and Their Appl., Ed. CAF. Manwaring et. al., Birmingham, U. K., Sept. 11-14, 1994, p. 645.
- [7] M. Leonowicz and H.A. Davies, Materials Letters, 19 (1994) 275.
- [8] M. Leonowicz, P.J. McGuiness, G.B. Hatch, H.A. Davies, 1.R. Harris, J. Magn. Magn. Mater. 166 (1997) 165.
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-article-BOS1-0006-0078