XTEM-study of ceramic-metal joints: SiC/Mo, Si3N4/Mo.

• Autorzy: Jezierska E. , Jezierski S. , Jakubowski J. , Senkara J.
• Konferencja: XV Physical Metallurgy and Materials Science Conference on Advanced Materials & Technologies AMT'98, Kraków-Krynica, Poland, 17-21 May, 1998
• Języki publikacji: EN

Abstrakty

EN

Joining of SiC and Si3N4 to molybdenum was carried out using Ag-Cu-In brazing alloy containing Ti as an active addition. In the present investigation a novel approach to the examination of ceramic-metal interfaces by means of cross-sectional transmission electron microscopy (XTEM) is described. The identification of the reaction products in an active zone of the joints was done and the detailed structure of multiphase interfacial region is presented. XTEM investigations were performed using Jeol microscopes; JEM 100B and JEM 3010, equipped with energy dispersive spectrometer (EDS). TEM samples were prepared by mechanical dimpling and ion beam thinning of real cross-sections of joints.

Słowa kluczowe

EN

transmission electron microscope; joint; ceramics; metal; silicon; nitrogen; brazing alloy; crystallite

PL

mikroskop elektronowy prześwietleniowy; połączenie; ceramika; metal; krzem; azot; lut twardy; krystalit

• Wydawca: Wydawnictwo SIGMA-NOT
• Czasopismo: Inżynieria Materiałowa
• Rocznik: 1998
• Tom: R. XIX, nr 4
• Strony: 723--726

Twórcy

autor

Jezierska E.

autor

Jezierski S.

autor

Jakubowski J.

autor

Senkara J.

• Warsaw University of Technology, Faculty of Materials Science and Engineering