Advanced ceramics from solid combustion-derived powders.

• Autorzy: Pampuch R.
• Konferencja: XV Physical Metallurgy and Materials Science Conference on Advanced Materials & Technologies AMT'98, Kraków-Krynica, Poland, 17-21 May, 1998
• Języki publikacji: EN

Abstrakty

EN

Solid combustion has been appreciated for its energy- and time saving features and the possibility to produce by this method refractory compounds. The range of products produced via solid combustion constantly increases. In the present paper it is shown that solid combustion permits to produce in a simple way composite powders which can advantageously be used for fabrication of advanced structural ceramics such as: i. materials with an interpenetrating (duplex) microstructure; ii. zero-dimensional nanocomposites; iii. nanolaminates. In these cases a use of solid combustion-derived composite powders results not only in an increased time- and energy- efficiency of the synthesis but also permits to simplify the processing.

Słowa kluczowe

EN

ceramics; combustion process; composite powder; sintering of powders; hot pressing

PL

ceramika; proces spalania; proszek kompozytowy; spiekanie proszków; prasowanie na gorąco

• Wydawca: Wydawnictwo SIGMA-NOT
• Czasopismo: Inżynieria Materiałowa
• Rocznik: 1998
• Tom: R. XIX, nr 4
• Strony: 709--716
• Opis fizyczny: Bibliogr. 24 poz., rys.

Twórcy

autor

Pampuch R.

• Department of Advanced Ceramics, University of Mining and Metallurgy, Cracow

• University of Mining and Metallurgy, Department of Advanced Ceramics, Kraków

Bibliografia

• [1] R.J. Brook, in: Ceramic Microstructures ’86, J.A.Pask and A.D.Evans (eds.), Plenum Press, New York, 1987.
• [2] R.Pampuch, Ceramic science and technology facing changing paradigm. A viewpoint, J.Europ. Ceram. Soc., forthcoming.
• [3] T.Hirano, K.Niihara, Mater. Lett. 22 (1995) 249.
• [4] G.Sasaki, T.Suga, K.Suganuma, T.Fujita, K. Niihara, J.Ceram. Soc. Japn. 100 (1992) 536.
• [5] Kwang-Taek Hwang, Chang-Sam Kim, Kuen-Ho Auh, Deock-Soo Cheong, K. Niihara, Mater. Lett., 32 (1997) 251.
• [6] R. Riedel, M.Seher, G.Becker, J.Eur. Ceram. Soc. 5 (1989)113.
• [7] K.Ishizaki, T.Yanai, Silicates Industriels,7-8 (1995) 215.
• [8] K.Ishizaki, K. Hakkei, K. Ando, T.Kawakami, K. Niihara in: Proc. 3rd Int. Symp. On Ceramic Materials and Components for Engines, V.J.Tennery (ed): Amer.Ceram. Soc. Westerville, Ohio, 1988.
• [9] M. Sternicke, J.Europ. Ceram. Soc. 17(1997) 1061.
• [10] J. Lis, Ceramic Papers (Poland) 44 (1994)5.
• [11] D. Kata, PhD thesis, Dept. Advanced Ceramics, AGH, Kraków (1998).
• [12] V.V.Skorokhod, Ceramic Papers (Poland) 47(1995) 39.
• [13] M.Bougoin, F.Thevenot, J.Dubois, G.Fantozzi, J.of the Less-Common Met., 132(1987) 209).
• [14] L. Stobierski, Ceramic Papers (Poland) 48(1996) 5.
• [15] R.Pampuch J.Lis and L. Stobierski, in: Combustion and Plasma Synthesis of High-Temperature Materials, Z.A. Munir, J.B. Holt, (eds.), VCH, Weinheim, 1990.
• [16] R. Pampuch, E.Walasek, J. Bialoskórski, Ceramics Intern., 12(1986) 995.
• [17] M.W. Barsoum, T.El-Raghy, J.Am. Ceram. Soc., 79 (1996) 1953.
• [18] J. Morgiel, J.Lis, R.Pampuch, Materials Letters 27 (1996) 85.
• [19] R. Pampuch, J.Lis, in: Ceramics Charting the Future, ed. P.Vincenzini, Techna Srl. Faenza, 1995.
• [20] M.W. Barsoum, T.El-Raghy, J.Mater. Synthesis& Processing 3 (1997)197.
• [21] R.Pampuch, J.Lis, J. Piekarczyk, L. Stobierski, J.Mater. Synthesis & Processing 1 (1993) 93
• [22] T. Okano, T. Tano, T.Iseki, Trans.Met.Soc. Jpn., 14A (1993) 597.
• [23] R.Pampuch, J.Lis, L.Stobierski, M.Tymkiewicz, J.Europ.Ceram. Soc.,5 (1989) 283.
• [24] J.Lis, R.Pampuch, T.Rudnik, Z.Wegrzyn, Solid State Ionics 101-103 (1997) 59.