Application of MARC package for deep drawing processes design.

• Autorzy: Zimniak Z.
• Konferencja: XV Physical Metallurgy and Materials Science Conference on Advanced Materials & Technologies AMT'98, Kraków-Krynica, Poland, 17-21 May, 1998
• Języki publikacji: EN

Abstrakty

EN

This paper gives two selected examples of application of the multi-purpose software package MARC to numerically simulation of deep drawing processes design. In the first case the simulation of the sheet metal forming process of the multiple forming of the compressor cover was described. Several modified tools was tested and optimized of their shapes were found. The next example is the application of the system for sheet metal forming design to S-Rail sheet forming process. Using MARC package leads to improve productivity and reduce tool number and manufacturing costs.

Słowa kluczowe

EN

software package; MARC package; design; simulation; sheet metal forming; deep drawing

PL

pakiet programowy; pakiet MARC; projekt; symulacja; tłoczenie blach; głębokie tłoczenie

• Wydawca: Wydawnictwo SIGMA-NOT
• Czasopismo: Inżynieria Materiałowa
• Rocznik: 1998
• Tom: R. XIX, nr 4
• Strony: 681--684
• Opis fizyczny: Bibliogr. 6 poz., rys.

Twórcy

autor

Zimniak Z.

• Institute of Production Engineering &Automation, Wrocław University of Technology, Wrocław, Poland

• Wrocław University of Technology, Institute of Production Engineering & Automation

Bibliografia

• [1] Makinouchi, J. Mat. Proc. Tech., 60 (1996) 19.
• [2] Z. Zimniak, Proc. of the Inter. Conf. Wroclaw,. 3 (1997) 611.
• [3] J. Gronostajski et al. Proc. of Int. Conf. AMT’98, Krynica 1997.
• [4] R. Arrieux, M. Brunet, P. Vacher, T. Nhat, Annals of the CIRP, 45 (1996) 255.
• [5] J. Gronostajski, Z. Zimniak, J. Mat. Proc. Tech., 55 (1996) 213.
• [6] J.K. Lee, Int. Conf. NUMISHEET ’96, S-Rail Benchmark Problem, Ohio State University, 1996