Strain localisation during simple shear in commercial aluminium alloys.

• Autorzy: Świątnicki W. , Gasperini M. , Tkaczyk B.
• Konferencja: XVth Physical Metallurgy and Materials Science Conference on Advanced Materials & Technologies AMT'98, 17-21 May 1998, Kraków-Krynica, Poland
• Języki publikacji: EN

Abstrakty

EN

Shear tests and microstructural investigations have been performed on two grades of commercial aluminium alloys (3004 and 5182) used in can making, in order to compare their ability to strain localization during cold working. It was shown, that the ductility varies strongly with the shear direction in the sheet plane with respect to the initial rolling direction. The results are discussed in terms of the microstructure evolution during plastic deformation of the alloys.

Słowa kluczowe

EN

strain; plastic deformation; alloy; aluminium; ductility; cold working; commercial alloy

PL

odkształcenie; odkształcenie plastyczne; stop; aluminium; ciągliwość; obróbka plastyczna na zimno; stop techniczny

• Wydawca: Wydawnictwo SIGMA-NOT
• Czasopismo: Inżynieria Materiałowa
• Rocznik: 1998
• Tom: R. XIX, nr 3
• Strony: 510--513
• Opis fizyczny: Bibliogr. 6 poz., tab., rys.

Twórcy

autor

Świątnicki W.

• Faculty of Materials Science & Engineering, Warsaw University of Technology, Warsaw, Poland

autor

Gasperini M.

• LPMTM-CNRS, Institut Galilée Université Paris-Nord, France

autor

Tkaczyk B.

• Faculty of Materials Science & Engineering, Warsaw University of Technology, Warsaw, Poland

• Warsaw University of Technology, Faculty of Materials Science & Engineering, Warsaw

Bibliografia

• [1] A.Luft, Progr.Mater. Sci., 35, 97 (1991)
• [2] A.Korbel, J.D.Embury, M.Hatherly, P.L.Martin, H.W.Erbsloh, Acta Metall. 34, 1995 (1986)
• [3] A.Korbel, P.Martin, Acta Metall. 36, 2575 (1988)
• [4] M.Blicharski, S.Dymek, M.Wróbel, Proc. IX Conference on Electron Microscopy of Solids, 6-9 May, Kraków-Zakopane, p.215 (1996)
• [5] M. Gaspérini, C. Pinna and W. Swiatnicki, Acta Materialia, 44, 41 95 (1996)
• [6] B.Bay, N.Hansen, D.A.Hughes, D.Kuhlmann-Wilsdorf, ACTA METALL. MATER., 40, 205 (1992)