Powiadomienia systemowe
- Sesja wygasła!
- Sesja wygasła!
- Sesja wygasła!
- Sesja wygasła!
Tytuł artykułu
Identyfikatory
Warianty tytułu
Konferencja
XVth Physical Metallurgy and Materials Science Conference on Advanced Materials & Technologies AMT'98, 17-21 May 1998, Kraków-Krynica, Poland
Języki publikacji
Abstrakty
Pure aluminium (99,992%) deformed to large strains by CEC method has been annealed in the temperature range from 373 to 563 K. After annealing at 513 K a partly recrystallized microstructure with small grains is observed. An analysis of the changes in microstructure suggests that both discontinuous and continuous recrystallization might have taken place.
Wydawca
Czasopismo
Rocznik
Tom
Strony
502--505
Opis fizyczny
Bibliogr. 7 poz., rys.
Twórcy
autor
- Faculty of Non-Ferrous Metals, University of Mining & Metallurgy, 30-103 Kraków, Poland
autor
- Materials Research Department, Risø National Laboratory, DK-4000 Roskilde, Denmark
autor
- Faculty of Non-Ferrous Metals, University of Mining & Metallurgy, 30-103 Kraków, Poland
autor
- Materials Research Department, Risø National Laboratory, DK-4000 Roskilde, Denmark
autor
- Materials Research Department, Risø National Laboratory, DK-4000 Roskilde, Denmark
autor
- Sandia National Laboratories, Livermore, CA 94550, USA
- University of Mining & Metallurgy, Faculty of Non-Ferrous Metals, Kraków
Bibliografia
- [1] R.Z.Valiev; P.Lukas (eds.), Proc. 11th International Conference on the Strength of Materials, Prague, 1997, Mater. Sci. Eng. A234-236 (1997) 59
- [2] G.J.Shiflet, S.J.Poon, Y.He, H.Chen; T.H.Sanders et all (eds.) Proc.4th Int. Conf. Aluminum Alloys (ICAA4), Atlanta, GA, 1994, 738
- [3] J.Richert, M.Richert; Aluminium, 62 (1986) 604
- [4] M.Richert, A.Korbel; J. Mater. Proc. Technology, 53 (1995) 331
- [5] M.Richert, Inżynieria Materiałowa (1998), in press
- [6] M.Richert, N.Hansen, D.Juul-Jensen, Q.Liu, A.Godfrey; Mater. Sci. Eng. (1998) in preparation
- [7] F.J. Humphreys; Acta Metall. Mater. 45 (1997) 4231
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-article-BOS1-0005-0075