The effect of annealing environment on tensile properties of 316 austenitic stainless steel at room temperature.

• Autorzy: Abduluyahed A.A. , Zieliński W. , Kurzydłowski K.J.
• Konferencja: XVth Physical Metallurgy and Materials Science Conference on Advanced Materials and Technologies AMT'98, 17-21 May, 1998, Kraków-Krynica, Poland
• Języki publikacji: EN

Abstrakty

EN

The effect of aging time and environment at 600 degrees centigrade on room temperature properties of 316-type stainless steel has been investigated. The annealing in vacuum results in a discontinuous yielding of specimens while specimens annealed in air yield in a continuous way. The annealing in vacuum significantly increases the flow stress, while does not change the work hardening rate in the range of microscopically uniform deformation.

Słowa kluczowe

EN

annealing; tensile properties; austenitic stainless steel; austenitic steel; stainless steel; aging

PL

wyżarzanie; własności mechaniczne przy rozciąganiu; stal austenityczna nierdzewna; stal austenityczna; stal nierdzewna; starzenie

• Wydawca: Wydawnictwo SIGMA-NOT
• Czasopismo: Inżynieria Materiałowa
• Rocznik: 1998
• Tom: R. XIX, nr 3
• Strony: 315--318
• Opis fizyczny: Bibliogr. 10 poz., tab., rys.

Twórcy

autor

Abduluyahed A.A.

• Faculty of Materials Science and Engineering Warsaw University of Technology, Warsaw, Poland

autor

Zieliński W.

• Faculty of Materials Science and Engineering Warsaw University of Technology, Warsaw, Poland

autor

Kurzydłowski K.J.

• Faculty of Materials Science and Engineering Warsaw University of Technology, Warsaw, Poland

• Warsaw University of Technology, Faculty of Materials Science and Engineering

Bibliografia

• [1] A.Abduluyahed, K.Roźniatowski and K.J.Kurzydłowski, Scripta. Metall. 33, (1995) 1489.
• [2] K.J.Kurzydłowski, Mat. Sci. Eng., A234-236 (1997) 1083.
• [3] G.E.Dieter, Mechanical Metallurgy 3rd ed., pp. 295, McGraw-Hill Book Company (1986)
• [4] F.Garofalo, F. Gemmingen and W.F.Domis, Trans. Am. Soc. Metals, 54 (1960) 430.
• [5] J.T.Barnby, J. Iron Steel Inst., 204 (1966) 23.
• [6] K.J.McTaggart, K.J.Kurzydłowski and K.Tangri, Scripta Metall., 22 (1988)1445.
• [7] R.A. Varin, B. Mazurek, D. Himbeault, Mater. Sci. Eng., 94 (1987)109.
• [8] V.K. Sethi and R. Gibala, Scripta Metall, 11 (1977) 635.
• [9] T. Tottori, J.E. Talia and R. Gibala, Scripta Metall, 14 (1980) 1153.
• [10] M. Morinaga, Y. Murata, M.Furui and T. Wada, Scripta mater., 37 (1997) 699