The system for the sheet metal forming design.

• Autorzy: Gronostajski J. , Gronostajski Z. , Matuszak A. , Niechajowicz A. , Zimniak Z.
• Konferencja: XVth Physical Metallurgy and Materials Science Conference on Advanced Materials and Technologies AMT'98, 17-21 May, 1998, Kraków-Krynica, Poland
• Języki publikacji: EN

Abstrakty

EN

In the paper the conception of elaboration of system for sheet metal forming design is described. The system based on the incorporation of the forming limit stress diagram and constitutive equations into finite element analysis programme. Using the system will be possible to design the sheet metal forming processes without expensive and time consuming trial and error techniques.

Słowa kluczowe

EN

sheet metal; sheet metal forming; design; algorithm; diagnostic system

PL

cienka blacha; tłoczenie blach; projektowanie; algorytm; system diagnostyczny

• Wydawca: Wydawnictwo SIGMA-NOT
• Czasopismo: Inżynieria Materiałowa
• Rocznik: 1998
• Tom: R. XIX, nr 3
• Strony: 268--273
• Opis fizyczny: Bibliogr. 16 poz., rys.

Twórcy

autor

Gronostajski J.

• Institute of Production Engineering & Automation, Wrocław University of Technology, Wrocław, Poland

autor

Gronostajski Z.

• Institute of Production Engineering & Automation, Wrocław University of Technology, Wrocław, Poland

autor

Matuszak A.

• Institute of Production Engineering & Automation, Wrocław University of Technology, Wrocław, Poland

autor

Niechajowicz A.

• Institute of Production Engineering & Automation, Wrocław University of Technology, Wrocław, Poland

autor

Zimniak Z.

• Institute of Production Engineering & Automation, Wrocław University of Technology, Wrocław, Poland

• Wrocław University of Technology, Institute of Production Engineering & Automation

Bibliografia

• [1] S.P. Killer, Sheet Metal Ind. 42 (1965) 683.
• [2] G.M. Goodwin, La Metallurgia Italian, No 8 (1968) 609.
• [3] Z. Marciniak and K. Kuczyński, Int. J. Mech. Sci., 9 (1967) 609.
• [4] Barata da Rocha, F. Barlat and J.M. Jalinier, Mater. Sci. Eng. 68 (1985)151.
• [5] Barata da Rocha, J.M. Jalinier, Proc. Int. Symp. Plastic Inst, Paris (1985) 35.
• [6] J. Gronostajski, Z, Zimniak, J. Mat. Proc. Tech. 31 (1992) 57.
• [7] J. Gronostajski, Z, Zimniak, J. Mat. Proc. Tech. 32 (1992) 263.
• [8] J. Gronostajski, Z, Zimniak, J. Mat. Proc. Tech. 55 (1995) 213
• [9] R. Arrieux, C. Bedrin, M. Boivin, Proc. of 12th Biennial Congress IDDRG (1982) 61.
• [10] J. Gronostajski,: Archiwum Hutnictwa 30 (1985) 41.
• [11] Z. Gronostajski, Z. Misiołek, J. Mater. Process. Technol. 63 (1996) 133.
• [12] Tisza, Proc. of 19th IDDRG Biennial Congress (1996) 169.
• [13] R. Hill, The Mathematical Theory of Plasticity, Oxford University Press, London, 1950.
• [14] R. Hill, Int. J. Mech. Sci. 1(1993) 19.
• [15] F. Barlat et all, Int. J. Plasticity 7 (1991) 693
• [16] R.H.Wagoner, Metall. Trans. A, 11A (1980) 165.