Powiadomienia systemowe
- Sesja wygasła!
- Sesja wygasła!
Tytuł artykułu
Autorzy
Identyfikatory
Warianty tytułu
Konferencja
XV Physical Metallurgy and Materials Science Conference on Advanced Materials & Technologies, AMT'98, Kraków-Krynica 17-21May 1998, Poland
Języki publikacji
Abstrakty
Vacuum brazing tests were carried out on the age-hardened steel of the 14-5 PH type using the 82Au i 18Ni solder. It has been found that the joint has a multilayer structure and it consists of two kinds of Au-Ni solid solutions: one is rich in gold and the other - rich in nickel. The influence of roughness of the surfaces to be joined and the distance between them on the joint strength have been determined. The maximum tensile strength (Rm = 1257 MN/m2) was obtained for the joints of polished surfaces without any distances elements, brazed in the temperature 1273 K for 20 minutes and then aged in the temperature 723 K for 120 minutes.
Wydawca
Czasopismo
Rocznik
Tom
Strony
185--190
Opis fizyczny
Bibliogr. 6 poz., tab., rys.
Twórcy
autor
- Institute of Materials Engineering, Technical University of Szczecin
- Technical University of Szczecin, Institute of Materials Engineering
Bibliografia
- [1] W. Fendska, The Welding Journal 2 (1961) 17
- [2] J. Nowacki, W. Kryłłowicz, A. Potapczyk, VDI Berichte Nr 947( 1992) 311
- [3] J. Nowacki, Z. Haś, A. Bartczak, The Means of Preparing Centrifugal Compressor Impeller. Patent RP P – 288936 (1993).
- [4] R. Pereboom, Vacuum Brazing of Turbocompressor Impellers, Turbomachinery Maintenance Congress, Hampshire – England, 1993, Congr. Proc. pp. 1-10.
- [5] J. Nowacki, R. Lewandowski: Structure and Properties Vacuum Brazed Joints Au soldier/14 – 4 PH steel, 14 – th International Scientific Conference „Advanced Materials & Technologies” Polish Academy of Science – Silesian Technical University, Zakopane, 1995, Papers Volume 349 – 356
- [6] J. Nowacki, R. Lewandowski, A. Bartczak, W. Kryłłowicz: Scientific Problems of Vacuum Brazing of Centrifugal Compressor Impellers, The 4th European Conference on Advanced Materials and Processes – EUROMAT 95, The Federation of European Materials Societies, Padova, 1995, Conf.
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-article-BOS1-0003-0026