Toughness of HSLA-100 copper treated steels.

• Autorzy: Pytel S.M. , Garcia C.I. , DeArdo A.J.
• Konferencja: XV Physical Metallurgy and Materials Science Conference on Advanced Materials & Technologies, AMT'98, Kraków-Krynica 17-21May 1998, Poland
• Języki publikacji: EN

Abstrakty

EN

The mechanical properties of a series of HSLA-100 copper treated steels with different carbon and rare earth metals (REM) contents were evaluated. The steels used in this study were heat treated to exhibit yield strengths (YS) in the range 670 to 860 MPa. Of particular interest in this study were the effect of C and REM contents on the CTOD fracture toughness, upper shelf energy(USE) and fracture appearance transition temperature (FATT) of the steels. The results obtained clearly showed the deterioration of the impact and fracture toughness properties of the steels tested as the carbon content increased. Similar effect was observed with the total inclusion projected lengh per unit area.

Słowa kluczowe

EN

toughness; HSLA steel; copper; microstructural analysis

PL

wiązkość; stal niskostopowa o podwyższonej wytrzymałości; miedź; analiza mikrostrukturalna

• Wydawca: Wydawnictwo SIGMA-NOT
• Czasopismo: Inżynieria Materiałowa
• Rocznik: 1998
• Tom: R. XIX, nr 3
• Strony: 179--184
• Opis fizyczny: Bibliogr. 9 poz., tab., rys.

Twórcy

autor

Pytel S.M.

• Institute of Materials Science and Technology, University of Technology, Kraków, Poland

autor

Garcia C.I.

• The Basic Metals Processing Research Institute, Department of Materials Science and Engineering, University of Pittsburgh, USA

autor

DeArdo A.J.

• The Basic Metals Processing Research Institute, Department of Materials Science and Engineering, University of Pittsburgh, USA

• University of Technology, Institute of Materials Science and Technology, Kraków

Bibliografia

• [1] T.W. Montemarano, B.P. Sack, M.G. Vassilaros and H.H. Vanderveldt, Journal of Ship Production, 2, No. 3, pp. 145-162, August, (1986).
• [2] M. Mujahid, A.K. Lis, C.I. Garcia and A.J. DeArdo, Proceedings of the International Conference on Processing, Microstructure and Properties of Microalloyd and Other Modern HSLA Steels, Pittsburgh 3-6 June 1991, Iron and Steel Soc.of AIME, (1992).
• [3] C.I. Garcia, A.K. Lis, S.M. Pytel and A.J. DeArdo, Processing, Microstructure and Properties, Transactions of The ISS October, (1991), pp.97-106.
• [4] R.P.Foley, M.E.Fine., Proceedings of the International Conference on Processing, Microstructure and Properties of Microalloyed and Other Modern High Strength low Alloy Steels, Pittsburgh 3-6 June 1991, Iron and Steel Society of AIME, (1992).
• [5] E.G. Hamburg and A.D. Wilson, TMS AIME International Symposium, Processing, Microstructure and Properties of HSLA Steels Confference, Pittsburgh, November 1987.
• [6] S.J. Mikalac and M.G. Vassilaros, Proceedings of the International Conference on Processing, Microstructure and Properties of Microalloyed and Other Modern HSLA Steels, Pittsburgh 3-6 June 1991, Iron and Steel Society of AIME, (1992).
• [7] I.Kozasu and J.Tanaka, Proceedings of an International Symposium on Sulfide Inclusions in Steels, November 1974, pp. 286-308. ASM, Metals Park, Ohio 44073,
• [8] A. Nicholson et al., Ironmaking and Steelmaking, Vol.10, No.l, p. 185, (1983)
• [9] W.G. Wilson, Proceedings Electric Furnace Conference, Vol. 31, p.l54, (1973).