Microstructure and properties of deformed metals.

• Autorzy: Hansen N.
• Konferencja: XV Physical Metallurgy and Materials Science Conference on Advanced Materials & Technologies, AMT'98, Kraków-Krynica 17-21May 1998, Poland
• Języki publikacji: PL

Abstrakty

EN

Introduction of advanced, automated technique in the characterization of microstructures has led to new insight in the formation and evolution of deformation microstructures during thermomechanical processing of metals. These new techniques have also allowed an accurate determination of microstructural parameters which are used in an analysis of the effect of metals and process parameters on the properties of a deformed metal.

Słowa kluczowe

EN

microstructure; metal deformations; deformation; thermomechanical processing

• Wydawca: Wydawnictwo SIGMA-NOT
• Czasopismo: Inżynieria Materiałowa
• Rocznik: 1998
• Tom: R. XIX, nr 3
• Strony: 108--115
• Opis fizyczny: Bibliogr. 24 poz., rys.

Twórcy

autor

Hansen N.

• Materials Research Department, Riso National Laboratory, Roskilde, Denmark

• Riso National Laboratory, Material Research Department, Denmark

Bibliografia

• [1] B. Bay, N. Hansen, D.A. Hughes and D. Kuhlmann-Wilsdorf, Acta metall. mater., 40 (1992) 205.
• [2] J.H. Driver, D. Juul Jensen and N. Hansen, Acta metall. mater., 42 (1994) 3105.
• [3] D.A. Hughes, Microstructural and Crystallographic Aspects of Recrystallization. N. Hansen, D. Juul Jensen, Y.L. Liu and B. Ralph (eds.), Risø National Laboratory, Roskilde, 1995, 63.
• [4] D. Kuhlmann-Wilsdorf and N. Hansen. Scripta metall. mater., 25 (1991) 1557.
• [5] Bunsch, D. Juul Jensen and N. Hansen. This conference.
• [6] S.S. Hecker and M.G. Stout, Deformation, Processing and Structure, G. Krauss (ed.), American Society for Metals, Ohio (1989) 1.
• [7] J. Gil Sevillano, P. van Hotte and E. Aernoudt, Progress in Materials Science, 25 (1981) 69.
• [8] Y.L. Liu and C.Y. Barlow, Microstructural and Crystallographic Aspects of Recrystallization. N. Hansen, D. Juul Jensen, Y.L. Liu and B. Ralph (eds)., Risø National Laboratory, 1995, 151.
• [9] N. Hansen, Aluminium Alloys for Packaging II, J.G. Morris, S.K. Das and H.S. Goodrich (eds.), The Minerals, Metals and Materials Society, 1996, 11.
• [10] Q. Liu and N. Hansen, Scripta metall. mater., 32 (1995) 1289.
• [11] D.A. Hughes and N. Hansen, Acta mater. 45 (1997) 3871.
• [12] H.J. McQueen, J.K. Solberg, N. Ryum and E. Nes, Phil. Mag. A (1989), 473.
• [13] A. Oscarsson, H.-E. Ekström and W.B. Hutchinson, Recrystallization ’92, M. Fuentes and J. Gil Sevillano (eds.), 1992, 177.
• [14] R.Z. Valiev, A.V. Korznikov and R.R. Mulyukov, Met. Sci. Eng., A 168(1993) 141.
• [15] J. Richert and M. Richert, Aluminium 8 (1986) 604.
• [16] C. Harris, S.M. Roberts, P.B. Pragnell and F.J. Humphreys, REX’96, the Third International Conference on Recrystallization and Related Phenomena, T.R. McNelley (ed.), REX’96 Int. Board and Organizing Committee, 1997, 587.
• [17] M. Richert. A. Godfrey, Q. Liu and N. Hansen. Submitted for publication 1998.
• [18] W. Lojkowski, Acta metall. mater., 39 (1991) 1891.
• [19] E.E. Underwood, Quantitative Stereology, Addison Wesley, Massachusetts. 1970.
• [20] N. Hansen, Numerical Predictions of Deformation Process and the Behaviour of Real Materials, S.I. Andersen, J.B. Bilde-Sørensen, T. Lorentzen, O.B. Pedersen N.J. Sørensen (eds.), Risø National Laboratory, Roskilde, 1994, 325.
• [21] J.C.M. Li, Trans. Met. Soc. AIME, 227 (1963) 239.
• [22] D. Juul Jensen and N. Hansen, Acta metall. mater., 38 (1990) 1369.
• [23] G. Winther, D. Juul Jensen and N. Hansen, Acta mater. 45 (1997) 2455.
• [24] D. Juul Jensen. This conference.