Role of computer modelling in thermomechanical processing.

• Autorzy: Sellars C.M.
• Konferencja: XV Physical Metallurgy and Materials Science Conference on Advanced Materials & Technologies, AMT'98, Kraków-Krynica 17-21May 1998, Poland
• Języki publikacji: EN

Abstrakty

EN

Off-line models involving microstructural evolution are widely used in the steel industry to optimize process parameters. The models are generally based on empirical relationships, which are less succesful when applied to aluminium alloys. The reasons for this difference in usefulness are examined, and the development of physically based internal state variable models is discussed. The value of taking a multidisciplinary approach to the development of the next generation of models is argued on the basis of the complexity of modelling industrial processing.

Słowa kluczowe

EN

microstructural modelling; computer modelling; thermomechanical processing; industrial model

PL

modelowanie mikrostrukturalne; modelowanie komputerowe; obróbka termomechaniczna; model przemysłowy

• Wydawca: Wydawnictwo SIGMA-NOT
• Czasopismo: Inżynieria Materiałowa
• Rocznik: 1998
• Tom: R. XIX, nr 3
• Strony: 100--107
• Opis fizyczny: Bibliogr. 18 poz., tab., rys.

Twórcy

autor

Sellars C.M.

• IMMPETUS – Institute for Microstructural and Mechanical Process Engineering: University of Sheffield, UK

• University of Sheffield, IMMPETUS - Intitute for Microstructural and Mechanical Process Engineering, UK

Bibliografia

• [1] DA Linkens, JH Beynon and CM Sellars, Internat Conf. on Intelligent Processing Manufacturing of Materials, IPMM ’97, Gold Coast, Australia, July 1997, (ed) Chandra et al., Australiasia Pacific Forum, (1997), Vol II 676-682.
• [2] JH Beynon and CM Sellars, Proc 13th Riso Internat Symp on Materials Science: Modelling of Plastic Deformation and its Engineering Applications, (ed) SI Andersen et al., Riso National Laboratory, Roskilde, Denmark, (1992), 13-26.
• [3] M Sellars and J A Whiteman, Controlled Processing of HSLA Steels, BSC Product Technology Conference 1976.
• [4] CM Sellars and J A Whiteman, Metal Sci (1979), 13, 187-194.
• [5] P Choquet, A Le Bon and Ch Perdrix, Proc. ICSMA7, Strength of Metals and Alloys, (ed) H J McQueen et al.,, Montreal, Canada, (1985), Vol. 2, 1025-1030.
• [6] W Roberts, A Sandberg, T Siwecki and T Werlefors, Proc. Conf. HSLA Steels: Technology and Application, Philadelphia, ASM (1983), 67-84.
• [7] T Senuma and H Yada, Proc. 7th Riso International Symp on Metallurgy and Materials Science, (ed) N Hansen et al., Riso National Laboratory, Roskilde, Denmark, (1986), 547-552.
• [8] CM Sellars, Proc Internat Symp on Mathematical Modelling of Hot Rolling of Steel, Hamilton, Aug 1990. (ed) S Yue. Canadian Inst of Mining and Metallurgy, Montreal, Canada, (1990), 1-8.
• [9] B Dutta and CM Sellars, Mat Sci and Tech (1987), 3, 197-206.
• [10] AJ McLaren and CM Sellars, Mat Sci and Tech (1992), 8, 1090-94
• [11] ES Puchi, JH Beynon and CM Sellars, Internat Conf on Physical Metallurgy of Steels and Other Metals, Thermec-88, Tokyo, ISIJ, (1988), 572-579.
• [12] C M Sellars, Third Internat Conf on Aluminium Alloys, Their Physical and Mechanical Properties, (ed). L Arnberg, et al., NTH/SINTEF, Trondheim, Norway, (1992), Vol. III, 89-105.
• [13] E Nes and K Marthinsen, Proc Conf on Thermomechanical Processing in Theory, Modelling and Practice, [TMP]², Stockholm Sept 1996, Swedish Soc for Materials Technology (1997), 7-23.
• [14] T Furu, H R Shercliff, CM Sellars and M F Ashby, Proc ICAA5, Grenoble, 1996, (ed) JH Driver et al., Grenoble, 1996, Materials Science Forum vol 217-222, Transtech Publications, (1996), Part 1, 453-458.
• [15] CM Sellars, Proc Conf on Thermomechanical Processing in Theory, Modelling and Practice, [TMP]2, Stockholm Sept 1996, Swedish Soc for Materials Technology (1997), 35-51.
• [16] HE Vatne, T Furu and E Nes, Mat Sci and Tech, (1996), 12, 201-209.
• [17] HE Vatne, T Furu, R Osund and E Nes, Acta Mat (1996), 44, 4463-4473.
• [18] CM Sellars, Internat Conf on Thermomechanical Processing of Steels and Other Materials, Thermec ’97, Wollongong, July 1997, (ed) T Chandra and T Sakai, publ. TMS Warrendale, Pa, (1997), Vol 1, 3-11.