PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

The use of air-bottoming cycle as a heat source for the carbon dioxide capture installation of a coal-fired power unit

Treść / Zawartość
Identyfikatory
Warianty tytułu
Języki publikacji
EN
Abstrakty
EN
The installations of CO2 capture from flue gases using chemical absorption require a supply of large amounts of heat into the system. The most common heating medium is steam extracted from the cycle, which results in a decrease in the power unit efficiency. The use of heat needed for the desorption process from another source could be an option for this configuration. The paper presents an application of gas-air systems for the generation of extra amounts of energy and heat. Gas-air systems, referred to as the air bottoming cycle (ABC), are composed of a gas turbine powered by natural gas, air compressor and air turbine coupled to the system by means of a heat exchanger. Example configurations of gas-air systems are presented. The efficiency and power values, as well as heat fluxes of the systems under consideration are determined. For comparison purposes, the results of modelling a system consisting of a gas turbine and a regenerative exchanger are presented.
Rocznik
Strony
89--101
Opis fizyczny
Bibliogr. 11 poz.,
Twórcy
autor
autor
  • Silesian University of Technology, Institute of Power Engineering and Turbomachinery, ul. Konarskiego 18, 44-100 Gliwice, tadeusz.chmielniak@polsl.pl
Bibliografia
  • [1] Kotowicz J.: Selection of the most optimal parameters for the steam part of a combined gas-steam cycle. In: Proc. 9th Boiler Conference 2002. Research papers of IMiUE of Silesian University of Technology.
  • [2] Kotowicz J.: Analysis of effectiveness of combined gas-steam Power plants – a cycle with three pressure levels with reheating. Archiwum Energetyki (Archive of Energetics) XXXI(2001), 1-2, 29–49.
  • [3] Kotowicz J., Chmielniak T.: The influence of the structure of a gas-and-steam power station on the characteristics of efficiency. In: Proc. 4th International Science and Technology Conference, Expo-Ship 2006. Research papers number 10(82) of the Marine University in Szczecin.
  • [4] Korobitsyn M.: Industrial applications of the air bottoming cycle systems assessment department. Netherlands Energy Research Foundation, Energy Conversion and Management 43(2002), 1311–1322.
  • [5] Yousef S, Najjar H., Zaamout M.S.: Performance analysis of gas turbine airbottoming combined system. Energy Conversion and Management 37(1996), 4, 399–403.
  • [6] Ghazikhani M., Passandideh-Fard M., Mousavi M.: Two new high-performance cycles for gas turbine with air bottoming. Department of Mechanical Engineering, Ferdowsi University of Mashhad, Mashhad. Energy 36(2011), 294–304.
  • [7] Wójcik K.: Modelling the CO2 absorption from flue gases of large power units. PhD thesis, Silesian University of Technology, Gliwice 2010.
  • [8] Chmielniak T.: Gas Tubines – Development tendencies. In: Development strategies in the field of turbomachinery – Collection of papers (T. Chmielniak and M. Strozik, eds.), Gliwice 2009.
  • [9] Gate CycleTM - Getting Started & Installation Guide
  • [10] Mofarahi M., Khojasteh Y., Khaledi H., Farahnak A.: Design of CO2 absorption plant recovery of CO2 from flue gases of gas turbine. Energy 22(2008), 1311–1319.
  • [11] Lepszy S., Chmielniak T.: Analysis of the biomass integrated combined cycles with two different structures of gas turbines. ASME Turbo Expo 2008.
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-article-BGPK-3455-3239
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.