PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Powiadomienia systemowe
  • Sesja wygasła!
  • Sesja wygasła!
Tytuł artykułu

Eksperymentalne badania polimerów do elementów wibroizolacji sejsmicznej

Wybrane pełne teksty z tego czasopisma
Identyfikatory
Warianty tytułu
EN
Experimental study on seismic isolation made of polimer mass
Języki publikacji
PL
Abstrakty
PL
Celem niniejszego artykułu jest weryfikacja doświadczalna możliwości zastosowania polimerów do elementów wibroizolacji sejsmicznej. Własności dynamiczne zastosowanego materiału zbadano na podstawie wyników badań wstępnych, poddając dynamicznemu ściskaniu i rozciąganiu elementy wykonane z masy polimerowej. Dalsze badania wykonano na stole sejsmicznym, poddając wymuszeniom sejsmicznym model konstrukcji wieżowej z wibroizolacją oraz bez wibroizolacji i porównano odpowiedzi dla obu przypadków. Wyniki badań wskazują, że zastosowanie wibroizolacji w postaci elementów polimerowych może być bardzo efektywną metodą ochrony budowli przed zniszczeniem podczas trzęsień ziemi.
EN
The aim of the paper is the experimental verification of the applicability of the use of polymer mass for the elements of seismic isolation. Dynamic properties of the polymer were determined based on the results of the push-and-pull experiment. Further tests were conducted on a shaking table during which a model of the structure with and without seismic isolation was subjected to the same earthquake loading and their responses were compared. The results of the study indicate that the use of the seismic isolation made of polymer can be a very effective method of protecting structures from damage during earthquakes.
Rocznik
Strony
15--22
Opis fizyczny
Bibliogr. 6 poz.,Wykr., il.,
Twórcy
autor
autor
autor
  • Katedra Mechaniki Budowli i Mostów, Wydział Inżynierii Lądowej, Politechnika Krakowska, akwiecie@pk.edu.pl
Bibliografia
  • [1] Chopra A., Dynamics of structures. Theory and applications to earthquake engineering, Prentice-Hall, Englewood Cliffs, USA 1995.
  • [2] Jankowski R., Nonlinear rate dependent model of high damping rubber bearing, Bulletin of Earthquake Engineering, vol. 1, 2003, 307-403.
  • [3] Dolce M., Cardone D., Ponzo C., Shaking-table tests on reinforced concrete frames with different isolation systems, Earthquake Engineering and Structural Dynamics, vol. 36, 2007, 573-569.
  • [4] Ragni L., Dezi L., Dall’ Asta A., Leoni G., HDR devices for seismic protection of frame structures: Experimental results and numerical simulations, Earthquake Engineering and Structural Dynamics, vol. 38, 2009, 1199-1217.
  • [5] Samali B., Wu Y., Li J., Shake table tests on a mass eccentric model with base isolation, Earthquake Engineering and Structural Dynamics, vol. 32, 2003, 1353-1372.
  • [6] Kwiecień A., Zając B., Jankowski R., Static and dynamic properties of a flexible joint working in cracked historical masonries, Proc. of 6th International Conference on Structural Analysis of Historic Construction, Bath, 2–4 July 2008, Taylor & Francis/CRCPress/Balkema, vol. 2, London 2008, 931-939.
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-article-BGPK-2984-1813
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.