On a methodology for blending to obtain ternary formed fuels from waste

• Autorzy: Łach J. , Poskrobko S. , Tomaszewicz-Załuska D.
• Języki publikacji: EN

Abstrakty

EN

The paper presents a description of the mathematical formalism for blending to obtain ternary formed fuels from waste. The methodology assures obtaining fuels of required technology properties that result, for example, in a limited gram fraction of chlorine in dry mass of fuel, and an appropriate calorific value in the working state. The procedure results makes it possible to determine mass fractions of particular components of produced formed fuels, which in turn creates a possibility of performing stoichiometric calculations for both total and complete combustion. The modeling of both technological as well as calorific and emission properties of fuels from waste at their initial formation stage can have a significant importance for the implementation of new technologies of thermal waste processing, i.e. the production of synthetic fuels for power industry.

Słowa kluczowe

EN

blending; ternary formed fuels; waste

PL

paliwo formowane; sporządzanie mieszanki; straty

• Wydawca: Wydawnictwo Instytutu Maszyn Przepływowych PAN ; Komitet Termodynamiki i Spalania PAN
• Czasopismo: Archives of Thermodynamics
• Rocznik: 2009
• Tom: Vol. 30, no. 3
• Strony: 3--28
• Opis fizyczny: Bibliogr. 20 poz.,Rys., wz.,

Twórcy

autor

Łach J.

autor

Poskrobko S.

autor

Tomaszewicz-Załuska D.

• Technical University of Radom, Faculty of mechanical Engineering, 26-600 Radom, Poland,

Bibliografia

• 1. ŁACH J., SADOWSKI K., POSKROBKO S.: Mathematical formalism for blending to obtain formed fuels from waste, Fuel, 87, 2008, 2677-2685.
• 2. SOBOLEWSKI A., WASILEWSKI R., STELMACH S.: Secondary solid fuels for power industry, [in:] Fuels from Waste, Wandrasz J.W., Pikon K. (Eds.), Helion, Gliwice 2007, 23-28 (in Polish).
• 3. ROTTER V.S., KOST T., WINKLER J., BILITEWSKI B.: Material flow analysis of RDF – production processes, Waste Management, 24(9), 2004, 1005-1021.
• 4. TILLMAN D.A.: Biomass co-firing: the technology, the experience, the combustion consequences, Biomass and Bioenergy, 19(6), 2000, 365-384.
• 5. ZIĘBIK A.: Selected problems of biomass co-combustion in energy systems, Proc. of the Conference on the Heat Transfer and Renewable Sources of Energy (HTRSE), Międzyzdroje, Poland, Mikielewicz J., Nowak W., Stachel A.A. (editors), Szczecin, 2006, 153-159.
• 6. WERTHER J., OGADA T.: Sewage sludge combustion, Progress in Energy and Combustion Science, 25(1), 1999, 55-116.
• 7. WEI X., SCHNELL U., HEIN K.R.G.: Behaviour of gaseous chlorine and alkali metals during biomass thermal utilization, Fuel, 84 (7-8), 2005, 841-848.
• 8. HENSEN L.A., NIELSEN H.P., FRANDSEN F.J., JOHANSEN K.D., HORLYCK S., KARLSSON A.: Influence of deposit formation on corrosion at a straw-fired boiler, Fuel Processing Technology, 64(103), 2000, 189-209.
• 9. TIPSE S.S., SHENG C., BOOTY M.R., MAGEE R.S., DREIZIN E.L.: Synthetic fuel for imitation of municipal solid waste in experimental studies of waste incineration, Chemosphere, 44 (5), 2001, 1071-1077.
• 10. CAPUTO A.C., PALUMBO M., SCACCHIA F.: Perspectives of RDF use in decentralized areas: comparing power and co-generation solutions, Applied Thermal Engineering, 24(14-15), 2004, 2171-2187.
• 11. CAPUTO A.C., PELAGAGGE P.M.: RDF production plants: I Design and costs, Applied Thermal Engineering, 22(4), 2002, 423-437.
• 12. CAPUTO A.C, PELAGAGGE P.M.: RDF production plants: II Economics and profitability, Applied Thermal Engineering, 22(4), 2002, 439-448.
• 13. LARSON E.D., WORRELL E., CHEN J.S.: Clean fuels from municipal slid waste for fuel cell buses in metropolitan areas, Resources. Conservation and Recycling, 17, 1996, 273-98.
• 14. HVANG I.H., MATSUTO T., TANAKA N., SASAKI Y., TANAAMI K.: Characterization of char derived from various types of solid wastes from the standpoint of fuel recovery and pretreatment before landfilling, Waste Management, 27(1), 2007, 1155-66.
• 15. WANDRASZ J.W., WANDRASZ A.: Formed Fuels, Seidel-Przywecki, Warsaw 2006 (in Polish).
• 16. MOSTOWSKI A., STARK M.: Linear Algebra, PWN, Warsaw 1968 (in Polish).
• 17. SERWIŃSKI M.: Principles of Chemical Engineering, WNT, Warsaw 1976 (in Polish).
• 18. KINCAID D., CHENEY W.: Numerical Analysis: Mathematics of Scientific Computing, Pacific Grove, California: Brooks/Cole Publishing Company, 1991.
• 19. HIGHAM N.J.: Accuracy and Stability of Numerical Algorithms, SIAM, Philadelphia 1996.
• 20. NADZIAKIEWICZ J.: Combustion of Solid Waste Substances, Gnome, Katowice 2003 (in Polish).