The effect of geometrical parameters on the mass flux in a two phase thermosyphon loop heated from one side

• Autorzy: Bieliński H. , Mikielewicz J.
• Języki publikacji: EN

Abstrakty

EN

In the paper the authors present a one-dimensional model of two-phase flow and heat transfer in a closed thermosyphon loop. The presented model is based on mass, momentum, and energy balances in the evaporator, rising tube, condenser, and the falling tube. The homogeneous and separate two-phase flow models are used in calculations. The effect of geometrical parameters of the loop on the mass flux rate in the steady state is examined numerically.

Słowa kluczowe

EN

thermosyphon; two phase

PL

dwie fazy; termosyfon

• Wydawca: Wydawnictwo Instytutu Maszyn Przepływowych PAN ; Komitet Termodynamiki i Spalania PAN
• Czasopismo: Archives of Thermodynamics
• Rocznik: 2008
• Tom: Vol. 29, no. 1
• Strony: 59--68
• Opis fizyczny: Bibliogr. 16 poz.,rys., wykr., wz.,

Twórcy

autor

Bieliński H.

autor

Mikielewicz J.

• Institute of Fluid Flow Machinery, PAN, Gdańsk

Bibliografia

• [1] BIELIŃSKI H., MIKIELEWICZ J.: A two-phase thermosyphon loop with side heating, Chemical and Process Engineering (Inżynieria Chemiczna i Procesowa), 26(2005), 339-351, (in Polish).
• [2] BIELIŃSKI H., MIKIELEWICZ J.: Natural circulation in two-phase thermosyphon loop heated from below, Arch. of Thermodynamics, Vol. 25(2004), No. 3, 15-26.
• [3] BIELIŃSKI H., MIKIELEWICZ J.: New solutions of thermal diode with natural laminar circulation, Arch. of Thermodynamics, Vol. 22(2001), 89-106.
• [4] BIELIŃSKI H., MIKIELEWICZ J.: Natural convection of thermal diode, Arch. of Thermodynamics, Vol. 16(1995), 3-4.
• [5] BLOCK J. A.: Emergency cooling water delivery to the core inlet of PWRs during LOCA, Creare TM-529, 1976.
• [6] DZIUBIŃSKI M.: Hydrodynamics of two-phase gas-liquid mixtures, Łódź 2005.
• [7] FERNANDEZ R.T., SURSOCK J.P., KIANG R.L.: Reflux boiling heat removal in a sealed TMI-2 system test facility, ANS/ENS Thermal Reactor Safety Meeting, Tennessee, 1980.
• [8] GOGOL W.: Heat Transfer. Tables and Graphs, Warszawa 1976.
• [9] JASPIKE D.: Advances in thermosyphon technology, Advances in Heat Transfer, Vol. 97, 1981, 369-386.
• [10] MADEJSKI J., MIKIELEWICZ J.: Liquid fin a new device for heat transfer equipment, Int. J. Heat Mass Transfer, Vol. 14(1971), 357-363.
• [11] MCKEE H.R.: Thermosyphon reboilers - a review, Ind. Engng. Chem., Vol. 62, 1970, 76-82.
• [12] MERTOL A., GREIF R.: A review of natural circulation loops, In Natural Convection: Fundamentals and Applications, 1985, 1033-1071.
• [13] MIKIELEWICZ J.: Modelling of the heat-flow processes, Polska Akademia Nauk Instytut Maszyn Przepływowych, Seria Cieplne Maszyny Przepływowe Tom 17, Ossolineum 1995.
• [14] ORZECHOWSKI Z.: Two Phase Flows, One-Dimensional, Steady State, Adiabatic, PWN, Warszawa 1990.
• [15] STOMMA Z.: Two-phase flow void fraction values determination, IBJ Report IBJ/1819/IX/R/A, Świerk 1979.
• [16] WALLIS B.W.: One-Dimensional Two-Phase Flow, McGraw Hill, New York 1969