Tytuł artykułu
Autorzy
Wybrane pełne teksty z tego czasopisma
Identyfikatory
Warianty tytułu
Języki publikacji
Abstrakty
In the paper, results of analytical investigations concerning distribution of heat generated by local heat source placed in a solid plate, have been presented. The analysis yields the conclusion that in the considered case, the distribution of heat depends mainly on the heat transfer coefficient between the surface and liquid layer flowing at that surface. As a result the qualitative formula was obtained, which can be helpful for accurate determination of heat transfer coefficient without commonly applied assumption about negligible conductive heat losses in the plate.
Słowa kluczowe
Czasopismo
Rocznik
Tom
Strony
69--86
Opis fizyczny
Bibliogr. 6 poz., tab., wykr.
Twórcy
autor
- Gdańsk University of Technology, Faculty of Mechanical Engineering, 80-952 Gdańsk, ul. Narutowicza 11/12, Poland
autor
- Technical University of Białystok, Faculty of mechanical Engineering, Wiejska 45c, 15-351 Białystok, Poland
Bibliografia
- [1] STEVENS J., WEBB B.W.: Local heat transfer coefficients under an axisymmetrics, single phase liquid jet, Trans. ASME, J. Heat Transfer, 1991, 113, 71.
- [2] GUMKOWSKI S., MlKIELEWICZ J.: A model of heat transfer in laminar liquid film formed by impinging jet, IX Symposium of Heat and Mass Transfer, Gliwice - Szczyrk 2001, 429-436.
- [3] MSC.Patran - User's Guide, The MacNeal - Schwendler Corporation, 2003.
- [4] MSC.Nastran/Thermal - User's Guide, The MacNeal - Schwendler Corporation, 2001.
- [5] Compaq Visual Fortran - Programmers Guide, Compaq Computer Corporation 2001.
- [6] IMSL Fortran Subroutines for Mathematical Applications, Manual - Math/Library, Volumes 1 and 2. Visual Numerics Inc., Houston, Texas, USA 1997.
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-article-BGPK-1398-5366