PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

Strata ciśnienia gazu w cyklonie w warunkach dużego obciążenia pyłem

Autorzy
Identyfikatory
Warianty tytułu
EN
Pressure drop in a cyclone at high dust load
Języki publikacji
PL
Abstrakty
PL
Omówiono metody obliczania straty ciśnienia w cyklonie z uwzględnieniem dużych stężeń pyłu. Zwiększanie stężenia powoduje zmniejszenie straty ciśnienia. Zmierzono zmniejszenie straty ciśnienia w cyklonie o średnicy 0,2 m ze stycznym wlotem i prędkości wlotowej 8,9 m/s. Stężenie masowe pyłu zmieniano od 0,004 do 0,25 kg/kg. Zmierzona redukcja strat ciśnienia w badanym cyklonie jest mniejsza niż obliczona ze znanych zależności.
EN
Methods of calculating the pressure drop in a cyclone, including higher concentrations of solids have been described. Increase of the concentration brings about the decrease of pressure loss. The reduction of pressure losses in a cyclone of 0,2 m diameter with tangential inlet at the inlet velocity 8.9 m/s have been measured. Solids loading was changed within from 0.004 to 0.25 kg/kg. The reduction of pressure losses measured were lower than those calculated from well known equations.
Słowa kluczowe
PL
ciśnienie   cyklon   gaz   pył  
Rocznik
Strony
121--134
Opis fizyczny
Bibliogr. 17 poz., rys., tab.
Twórcy
autor
  • Wydział Inżynierii Mechanicznej i Informatyki Politechniki Częstochowskiej
Bibliografia
  • [1] SHEPHERD C.B., LAPPLEC.E., Ind. Eng. Chem., 32, 1940, 1246.
  • [2] BARTH W., Bereclmung unci Auslegung von Zyklonabscheidem auf Grund neuerer Untersuchungen, Brennstoff-Warme-Kraft, 8, 1956, 1.
  • [3] ALEXANDER R.McK., Proc. Australas. Inst. Mining Mat. N.S.203, 1949, 152.
  • [4] STAIRMANDC.J., Enginering London 168, 1949, 409.
  • [5] FAYED M.E., OTTEN L. Eds., Handbook of Powder Science and Technology, Van Nostrand Reinhold Company, 1984.
  • [6] KABSCH P., Odpylanie i odpylacze, 1.1., Mechanika aerozoli i odpylanie suche, WNT, Warszawa, 1992.
  • [7] WARYCHJ., Oczyszczanie gazow. Procesy i aparatura, WNT, Warszawa, 1998.
  • [8] MUSCHELKNAUTZ E., BRUNNER K., Chemie-Ing.-Techn., 39, 1967, 531.
  • [9] BOHNETM., Chemie-Ing.-Techn. 54, 1982, 621.
  • [10] GRACE J.R., AVIDAN A.A., KNOWLTON T.M., Circulating Fluidized Beds, Blackie Academic & Professional An Imprint of Chapman & Hall, 1997.
  • [11] VD1 Heat Atlas 1993, E. Muschelknautz, M. Trefz, Ch. Lh, Pressure drop and separation efficiency in cyclones.
  • [12] SHEPHERD C.B., LAPPLE C.E., Ind. Eng. Chem., 31, 1939, 972.
  • [13] COMAS M., COMAS J., CHETRIT C, CASAL J., Cyclone Pressure Drop and Efficiency with and without an Inlet Vane, Powder Technology 66 1991 143.
  • [14] BASKAKOV A.P., DOLGOV V.N., GOLDOBIN Y.M., Aerodynamics and Heat Transfer in Cyclones with Particle-Laden Gas Flow, [in:] P. Basu, J. F. Large (Eds.), Circulating Fluidized Bed Technology, II Conference, Pergamon Press, Oxford, 1998.
  • [15] FASSANI F.L., GOLDSTEIN L.Jr., A Study of the Effect of High Inlet Solids Loading on a Cyclone Separator Pressure Drop and Collection Efficiency, Powder Technology, 107, 2000, 60.
  • [16] HOFFAMNN A.C., VAN SANTEN A., ALLEN R.W.K., CLIFT R., Effects of Geometry and Solid Loading on the Performance of Gas Cyclones, Powder Technology 70 1992 83.
  • [17] USHIKI K., MIZUNO M, SAKAKIBARA H., UTSUMI R., HATA T., HORIUCHI T, Experimental Study on the Performance of Very: Small Cyclones for the Recycle of Ultra-Fine Powder, CFB Technology IV Conference, Pensylvannia, 1993, p. 504.
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-article-BGPK-1006-4034
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.