PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

Modelowanie numeryczne przepływu dwufazowego typu ciecz-ciecz w mieszalniku statycznym SMX

Identyfikatory
Warianty tytułu
EN
CFD modellingof two-phase flows in an SMXstatic mixer
Języki publikacji
PL
Abstrakty
PL
Wykonano modelowanie laminarnego przepływu dwufazowego typu ciecz-ciecz w mieszalniku statycznym, złożonym z sześciu wkładek mieszających typu SMX. Fazę ciągłą stanowił roztwór oczyszczonego CMC w wodzie, fazę rozproszoną krople oleju silikonowego. W modelowaniu numerycznym (CFD) przepływu dwóch płynów newtonowskich zastosowano podejście Eulera i Lagrangea.
EN
Modelling of laminar, two-phase liquid-liquid flows in a static mixer formed by six inserts of the SMX type was carried out. The refined CMC solution constituted the continuous phase and silicon oils were the dispersed phase. The CFD numerical modelling of the flow of the two Newtonian fluids was performed with the application of both the Eulerian and Lagrangian approaches.
Rocznik
Strony
449--467
Opis fizyczny
Bibliogr. 17 poz., tab., wykr.
Twórcy
  • Instytut Inżynierii Chemicznej i Procesów Ochrony Środowiska, Politechnika Szczecińska, al. Piastów 42, 71-065 Szczecin
autor
  • Instytut Inżynierii Chemicznej i Procesów Ochrony Środowiska, Politechnika Szczecińska, al. Piastów 42, 71-065 Szczecin
Bibliografia
  • [1] Jaworski Z., Pianko-Oprych P., Two-phase laminar flow simulations in a Kenics static mixer. The standard Eulerian and Lagrangian approaches, Trans. I. Chem. E., Part A, 2002, 80, 910.
  • [2] Byrde O., Sawley M.L., Optimization of a Kenics static mixer for non-creeping flow conditions, Chem. Eng. J., 1999, 72, 163.
  • [3] hobbs D.M., Muzzio F.J., Optimization of a static mixer using dynamical systems techniques, Chem. Eng. Sci., 1998, 53, 18, 3199.
  • [4] Hobbs D.M., Swanson P.D., Muzzio F.J., Numerical characterization of Reynolds number flow in the Kenics static mixer, Chem. Eng. Sci., 1998, 53, 8, 1565.
  • [5] Hobbs D.M., Muzzio F.J., The Kenics static mixer, a three dimensional chaotic flow, Chem. Eng. J., 1997, 67, 153.
  • [6] hobbs D.M., muzzio F.J., Reynolds number effects on laminar mixing in the Kenics static mixer, Chem. Eng. J., 1998, 70,93.
  • [7] berkman P.D., calabrese R.V., Dispersion of viscous liquids by turbulent flow in a static mixer, AIChE J., 1988, 34, 4, 602.
  • [8] Zalc J.M., Szalai E.S., Muzzio F.J., Jaffer S., Characterization of flow and mixing in a SMX static mixer. Fluid mechanics and transport phenomena, AIChE J., 2002, 48, 3, 427.
  • [9] Rauline D., Le Blevec J.M., Bousquet J., Tanguy P.A., A comparative assessment of the per­formance of the Kenics and SMX static mixers. Trans. I. Chem. E., Part A, 2000, 78, 389.
  • [10] stre1ff F., Dispersion en ligne et transfert de matiere au moyen de melangeurs statiques, Revue Technique Sulzer, 1977, 3, 108.
  • [11] Chen S.J., Libby D.R., Gas-liquid and liquid-liquid dispersions in a Kenics mixer, Paper presented at the 71st Annual AIChE Meeting, 1978.
  • [12] Manileve C, Pacek A.W., Droplet break-up within static mixers, Internal report, The University of Birmingham, Birmingham, UK, private communication.
  • [13] Aylianawati, Manileve C, Baker M., Pacek A.W., Breakage of oil drops in Newtonian and non-Newtonian continuous phase in Kenics mixers, 15th International Congress of Chemical and Process Engineering, CHISA 2002, 25-29 August 2002, Praha, Czech Republic, CD ISBN 80-86059-33-2, F3.6.
  • [14] Chung T.J., Computational fluid dynamics, 2002, Cambridge University Press, Cambridge.
  • [15] Patankar S. V., Numerical heat transfer andfluid flow, Hemisphere Publishing Corporation, US A, 1980.
  • [16] Pianko-Oprych P., Jaworski Z., Modelowanie CFD ukladow ciecz-ciecz w mieszalnikach statycznych z zastosowaniem modelu ASM, Inz. Apar. Chem., 2002, 41, 4S, 102.
  • [17] Kays W.M., Crawford M.E., Convective heat and mass transfer, 2001, McGraw Hill, New York.
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-article-BGPK-1006-3973
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.