PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

Properties of the two-phase flow in the helicoidal reactor

Wybrane pełne teksty z tego czasopisma
Identyfikatory
Warianty tytułu
PL
Właściwości przepływu dwufazowego w reaktorze helikoidalnym
Języki publikacji
EN
Abstrakty
EN
The hydrodynamics of the two-phase (liquid-gas) helical flow were presented. The structure of the flow (map), and physical models of the reactor were discussed.
PL
Scharakteryzowano podstawy hydrodynamiki przepływu dwufazowego ciecz-gaz. Omówiono reżimy przepływów (mapy struktury przepływów), powierzchnię międzyfazową oraz fizyczne (hydrodynamiczne) modele reaktora.
Rocznik
Strony
297--308
Opis fizyczny
Bibliogr. 29 poz., wykr., tab., rys.
Twórcy
autor
  • Instytut Inżynierii Chemicznej i Procesowej, Politechnika Warszawska
autor
  • Instytut Inżynierii Chemicznej i Procesowej, Politechnika Warszawska
Bibliografia
  • [1] Desmet G., Verelst H., Baron G., Chem. Eng. Sci., 51, 1996, 1287-1298.
  • [2] Desmet G., Verelst H., Baron G., Mixing characteristics of a Couette-Taylor bioreactor with gel-entrapped cells, Proceedings of the Sevevth European Congress on Mixing, Koninklijke Vlaamse Ingenieurs Vereninging, Antwerp 1991.
  • [3] Resende M.M., Tardioli P.W, Fernandez V.M., Ferreira A.L.O., Giordano R.L.C., Chem. Eng. Sci., 56, 2001, 755-761.
  • [4] Sczechowski J.G., Koval C.A., Nobel R.D., Chem. Eng. Sci., 50, 1995, 3163-3173.
  • [5] Kataoka K., Ohmura N., Kouzu M., Simamura Y., Okubo M., Chem. Eng. Sci., 50, (9), 1995, 1409-1416.
  • [6] Lee S., Lueptow R.M., Journal of Membrane Science, 192, (2001), 129-143.
  • [7] Jung W.M., Kang S.H., Kim W.S., Choi C.K., Chem. Eng. Sci., 55, 2000, 733-747.
  • [8] Judat B., Racina A., Kind M., Chem. Eng. Technol., 27, 2004, 287-292.
  • [9] Kank S., Lee S., Jung W., Kim M., Kim W., Choi C., Feigelson R., Journal of Crystal Growth, 254, 2003, 296-205.
  • [10] Ameer G.A., Grovender E.A., Obradovic B., Cooney C.L., Langer R., AlChE Journal, 45, (3), 1999, 633-638.
  • [11] Wroński S., Dłuska E., Hubacz R., Molga E., Chem. Eng. Sci., 54, 1999, 2963-2967.
  • [12] Dłuska E., Wroński S., Hubacz R., Chem. Eng. Sci., 56, 2001, 1131-1136.
  • [13] Dłuska E., Wroński S., Ryszczuk T., 6th World Congress of Chemical Engineering, Melbouurne, 23-27 September 2001.
  • [14] Hubacz R., 2003, Ph. D. Thesis., Warsaw University of Technology.
  • [15] Hubacz R., Wroński S., Experimental Thermal and Fluid Science. - accepted to print.
  • [16] Camacho F., Paez M.P., Blazquez G., Garrido J. M., Chem. Eng. Sci., 47, 1992, 4309-4314.
  • [17] Camacho F., Paez M.P., Blazquez G., Jiminez M.C., Fernandez M., Chem. Eng. Sci., 50, 1995, 1181-1186.
  • [18] Camacho F., Paez M.P., Jiminez M.C. „Chem. Eng. Sci., 52, 1997, 1387-1391.
  • [19] Wroński S., Hubacz R., Ryszczuk T., Chem. Eng. of Journal - accepted to print.
  • [20] Jhaveri A.S., Sharma M.M., Chem. Eng. Sci., 23, 1968, 1-8.
  • [21] Jhaveri A.S., Sharma M.M., Chem. Eng. Sci., 23, 1977, 669-676.
  • [22] Sahay B.N., Sharma M.M., Chem. Eng. Sci., 28, 1973, 2245-2255.
  • [23] Joshi J.B., Sharma M.M., Can J. Chem.. Engng., 55, 1977, 683-695.
  • [24] Danckwerts P.V., Gas-Liquid Reactions, McGraw Hill, New York 1970.
  • [25] Charpentier J.C., Mass transfer rates in gas-liquids absorbers and reactors. Advances in Chemical Engineering, eds Drew T.B., Cokelet G.R., Hoopes J.W.Jr., Vermeulen T., 11 1981 1-133. Academic Press, New York.
  • [26] Ryszczuk T., Wroński S., Reports of the Faculty of Chemical and Process Engineering at the Warsaw University of Technology, 29 2003 - to be published.
  • [27] Ryszczuk T., Ph. D. Thesis, Warsaw University of Technology 2003.
  • [28] Gianetto A., Silveston P.L., Multiphase Chemical Reactors, 1986, Hemisphere Publishing Corporation, Washington, U.S.A.
  • [29] Wroński S., Dłuska E.,Woliński J., Polish Journal of Chemical Technology - to be published.
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-article-BGPK-1003-3777
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.