A drying process of lacquer coating in wood manufacturing industry simulations and experiments

• Autorzy: Garcia-Padron R. , Loyd D.
• Języki publikacji: EN

Abstrakty

EN

This study will focus on simulation of the industrial drying process of a waterborne lacquer coating. Calculations of temperature distribution and water concentration were made for lacquer-coated particleboard, foil paper covered particleboard, and glass-plate. A finite difference method with an implicit time marching formulation was used. Temperature and weight measurements have been made for the corresponding materials. The experiments were made in a full-scale drying plant. The simplified models used in this study were found to give a sufficiently accurate description of the heat and mass transfer during drying of lacquer layer coated on a particle board.

Słowa kluczowe

EN

drying; heat transfer; lacquer coating; mass transfer; wood industry

• Wydawca: Wydawnictwo Instytutu Maszyn Przepływowych PAN ; Komitet Termodynamiki i Spalania PAN
• Czasopismo: Archives of Thermodynamics
• Rocznik: 2000
• Tom: Vol. 21, nr 3-4
• Strony: 3--16
• Opis fizyczny: Bibliogr. 15 poz.,Rys., wykr.,

Twórcy

autor

Garcia-Padron R.

autor

Loyd D.

• Division of Applied Thermodynamics and Fluid Mechanics, Department od Mechanical Engineering, Linkoping University, Sweden,

Bibliografia

• [1] COHEN E. D. AND GUTOFF E. D., EDS.: Modern coating and drying technology, VCH Publishers, 1992.
• [2] HAMBURG H. R. AND MORGANS W. M., EDS.: Hess's paint film defect: Their causes and cure, Chapman and Hall, 1979.
• [3] BIRD R. B., STEWART W. E. AND LIGHTFOOT E. N.: Transport phenomena, John Wiley & Sons, 1960.
• [4] KEEY R. B.: Drying: Principles and practice, Pergamon Press, 1975.
• [5] LUIKOV A. V.: Heat and mass transfer in capillary-porous media, Pergamon Press, 1966.
• [6] DEVRIES D. A.: Simultaneous transfer of heat and moisture in porous media, Transactions, American Geophysical Union, Vol. 39(1958), 5, 909-916.
• [7] STRUMILLO C. AND KUDRA T.: Drying: Principles, application and design, Gordon and Breach Science Publishers, 1986.
• [8] GARCIA-PADRON R., STORCK K., KARLSSON M., LOYD D.: Mass transport in thin surface layers - effects from a transport barrier zone, Fifth International Conference on advanced computational methods in heat transfer Heat transfer '98, Computational Mechanics Publications, 1998.
• [9] HARTLEY J. G.: Coupled heat and moisture transfer in soils: a review, [in:] Advances in drying, Vol. 5, (ed. Mujumdar A. S., Ch. 4) Hemisphere Publishing Corporation, 1987.
• [10] KOLLMAN F. F. P., KUENZI E. W. AND STAMM A. J.: Principles of wood science and technology, Vol. 2: Wood based materials, Springer-Verlag, 1975.
• [11] KOLLMAN F. F. P. AND CÔTÉ W. A.: Principles of wood science and technology, Vol. I: Solid wood, Springer-Verlag, 1984.
• [12] Engineered materials handbook, Vol. 2: Engineering plastics, ASM International, 1988.
• [13] CRC Handbook of chemistry and physics, 65th ed., CRC Press, 1984.
• [14] THOMAS L. C.: Heat transfer, Prentice-Hall, 1992.
• [15] ECKERT E. R. G. AND DRAKE R. M., JR.: Analysis of heat and mass transfer, McGraw-Hill, 1972.